Customers compare DL22320 to these similar products
Products Featured in this Video
Today, we'll be reviewing part number DL22320. This is a Dutton-Lainson Bolt-On Drop Leg Trailer Jack, rated at 2500 pounds. It has a nice square tube design. Our outer tube is going to measure 2 1/4 inches, and our inner tube is going to measure right at 2 inches. Overall, this trailer jack is going to provide us with a measurement of 25 1/4 inches in the retracted position. From the center of… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Thank you for the image. It appears you will need either the Demco Channel Tongue Trailer Coupler #DM13203-95 or #DM16080-95. Both of these couplers have a zinc coating for increased corrosion resistance and fit on a standard 3" wide channel…
view full answer...The Dutton-Lainson Square Swivel Jack #DL22340 has a mounting plate designed to fit trailer frames with a height of 3" - 5". I have attached a dimensional drawing below with all of the bolt spacing for your reference.
view full answer...The only difference in the Demco Channel Tongue Trailer Couplers #DM16080-95 and #DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing the…
view full answer...We do not offer a jack that swings up and will work with the I-beam aluminum trailer you said you have but we do have a fixed trailer jack that will work for you. I recommend part #HD50000101. This is a fixed mount square tube jack with a 5,000-lb…
view full answer...I have included a dimensional drawing of the Dutton-Lainson Round Swivel Jack #DL22335 that shows the overall extended height of the jack at 40-5/8" tall. This measurement is from the bottom of the wheel to the top of the jack when extended.
view full answer...Though your heater unit has a built-in regulator, it is only capable of handling a very narrow flow rate range. For this reason, it's best to not consider an appliance's built-regulator as a replacement for the second stage for a two-stage…
view full answer...There are several brake lines in varying lengths and sizes between your disc brake assembly and the surge brake coupler on your trailer. I am not sure which one you are looking for but if you can pinpoint this for me I may have some better advice for…
view full answer...I have a solution to your question. For the Dutton-Lainson Bolt-On, Drop Leg Trailer Jack, #DL22320, I have attached a photo of the mounting bracket. We have measured the bracket and the distances of the mounting holes and marked them for you in the…
view full answer...The shocks you're wanting to compare have different sized eyelets and are designed for specific hydraulic actuators. Sometimes you can fit actuator replacement parts from one actuator to another but the majority of the time you need to use an…
view full answer...The part you asked about is discontinued, does not fit, and Atwood is no longer in business so they don't have replacement parts. You'll need to purchase a replacement coupler: - Demco Channel Tongue Trailer Coupler #DM16080-95 - Titan…
view full answer...That is a tough question to answer as both are excellent manufacturers with their respective pros/cons. In regards to brake actuators, they both make and manufacture them here in the U.S.A. and they both come with a one year warranty. In regards to…
view full answer...I spoke with my contact at Dutton-Lainson, the manufacturer of the Bolt-On, Drop Leg Trailer Jack, #DL22320, about its functions. The jack can be cranked when there is a load on it to raise and lower the trailer as needed. When the jack is off the…
view full answer...