Replacement Coupler For Boat Trailer Bolt On Surge Coupler Switched to Electric Actuated Brakes
Question:
Hi, I have a trailer with an old hydraulic brake setup that Ive converted to electric brakes. Im wondering if there is any specific coupler available that would be a direct fit. The existing coupler/hydraulic setup is bolted to the frame of the trailer, but the spacing is closer to 2.25 as opposed to the 2 spacing Im seeing on most of your couplers. Any suggestions, without having to get new holes drilled? I have a picture. Thanks
asked by: Eric H
Expert Reply:
Thank you for the image. It appears you will need either the Demco Channel Tongue Trailer Coupler # DM13203-95 or # DM16080-95. Both of these couplers have a zinc coating for increased corrosion resistance and fit on a standard 3" wide channel tongue.
The Coupler # DM13203-95 has the bolt holes spread 5" on center and 0.85" from the top of the coupler.
The Coupler # DM16080-95 also has the bolt holes spread 5" on center but they sit lower at 1-1/4" below the top of the coupler.
If you have a different measurement please let me know.
Products Referenced in This Question
Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 21K
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 21000 lbs GTW
- 3 Inch Channel
- Auto Latch
- Demco
more information >
Product Page this Question was Asked From
Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2-5/16 Inch Ball Coupler
- Bolt-On
- 18000 lbs GTW
- 3 Inch Channel
- Auto Latch
- Demco
more information >
Continue Researching
- Shop: Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 21K
- Q&A: Comparing Demco Channel Tongue Trailer Couplers # DM16080-95 & # DM15931-95
- Q&A: Will The Facotry Brake Controller In A 2022 Ram 3500 Work With A Titan BrakeRite EOH Actuator
- Shop: Demco Channel Tongue Trailer Coupler - Zinc - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Shop: Hydrastar Electric Over Hydraulic Actuator Kit for Drum Brakes - 1,000 psi
- Shop: Dexter Zinc-Plated Straight-Tongue Coupler - 21,000 lbs
- Search Results: 2 5/16 coupler
- Shop: Demco Channel Tongue Trailer Coupler - Silver - 2-5/16" Ball - 3" Channel - Bolt On - 18K
- Search Results: trailer coupler
- Shop: Demco Channel Tongue Trailer Coupler - Silver - 2-5/16" Ball - 3" Channel - Bolt On - 21K
- Shop: Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi
- Video: Review of Demco Straight Tongue Trailer Coupler - Standard Coupler - DM15931-52
- Q&A: Hole Dimensions of Demco Channel Tongue Trailer Coupler # DM16080-95
- Q&A: Install Hardware/Bolt Kit Recommendation for Demco Coupler # DM15931-52
- Q&A: Replacement for Atwood Coupler With 2-5/16 Inch Hitch Ball Attachment
- Video: Review of Demco Straight Tongue Trailer Coupler - Standard Coupler - DM16080-95
- Q&A: Difference Between Demco and Dexter Replacement Hydraulic Actuator Shocks
- Q&A: Is the Dexter BrakeRite EOH Actuator DOT Compliant?
- Video: Dutton-Lainson Trailer Jack - Side Frame Mount Jack - DL22320 Review
- Search Results: dl97mr
- Search Results: trailer jack
- Search Results: dm16080~95
- Search Results: 7 pin wire extension
- Search Results: electric over hydraulic
- Shop: Suspension Enhancement
- Video: Redarc Tow-Pro Trailer Brake Controller Plug-and-Play Wiring Harness Review
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Type of Trailer Light
- Video: Review of Buyers Products Safety Chains and Cables - Safety Chains - 337BSC3835