Review of Dexter Trailer Bearings Races Seals Caps - Double Lip Grease Seal - 010-180-00 Video

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…

They are not the same. The Bearing Buddy #BB1980T-SS are threaded into place, and not driven in. If your hub bore is threaded, that's the model you'd need. If your hub bore is NOT threaded, you'd use part #BB1980A-SS. The difference…

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

What you have is a UFP A-60 drum brake actuator Philip so to replace just the inner member what you would need is the part #DX97FR and you'd be set.

You will need either the Replacement Inner Member #DX97FR for tandem axle drum brakes or the #DX99FR for a tandem axle with disc brakes. The capacity was increased on the A-60 from 6,000lbs to 7,500lbs which is why you see the higher rating on the…

It sounds like you are looking for the Replacement Inner Member #DX97FR. This is for drum brakes and does not have a reverse solenoid like the Inner Member #DX99FR you found.

The Replacement Inner Member for Dexter DX7.5L Brake Actuator part #DX97FR is compatible with a UFP A-70 Surge Brake Actuator.

Based on the dimensions you listed we have the part #010-180-00 which would fit and work well. This has an outer diameter of 2.33 inch and an inner diameter of 1.68 inch like you need so it would work well.

Based on the measurements you provided the Grease Seal #010-180-00 is the closest match we have for you in our inventory. We do not carry and did not see the part number referenced KOK 2611 in searches. To be sure you can always revisit your spindle…

We offer a range of grease seals in various sizes. These can be seen on the link provided. You can select parts based on the seal inner and outer diameters or you can use the bearing number from your trailer to search for a grease seal. I have…

If you can send me the diameter of the spindle where the grease seal sits and the diameter of the hub where the seal is pressed onto I can verify if we have the correct seal. Currently I do see we carry 2 hubs which use the Inner Bearing #LM67048 and…

Given that we are talking about thousandths of an inch difference, it is very likely that grease seal, #168233, is the correct seal for you. To be certain, you can find the inner and outer bearing numbers stamped into the metal of the bearings. That…