Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
Hey mark I can definitely try to point you in the direction of the correct hubs and brakes for your trailer. I was not able to find any useful references for the numbers you provided, but there are other ways to determine the correct hub. Do you…
view full answer...Are you basically asking how much length would this coupler add to the tongue of your trailer?
view full answer...Hey Al, this is a great question but since you have free-backing plates now you would never need to mess with the manual lock out of your Atwood coupler.
view full answer...To bleed the brakes on your Kar Kaddy SS Tow Dolly Item #DM9713045 you can use the Hand Vacuum Pump Brake Bleeder Item #PTW87030 by attaching the vacuum hose to the bleeder on the brake caliper and the other end to the reservoir and then…
view full answer...The Replacement Inner Member for Dexter DX7.5L Brake Actuator part #DX97FR is compatible with a UFP A-70 Surge Brake Actuator.
view full answer...Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…
view full answer...What you have is a UFP A-60 drum brake actuator Philip so to replace just the inner member what you would need is the part #DX97FR and you'd be set.
view full answer...The best replacement brake kit assembly that you're looking for is one that we have branded under the etrailer name: - Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs #AKFBBRK-35-D This has the…
view full answer...To determine which hydraulic drum brake assemblies will fit on your 2,500 pound axles you'll need to measure the dimensions of your drums. For example, if your drums are 10 by 2-1/4 inches you can use #AKFBBRK-35-D. Since you have a boat trailer…
view full answer...Hey Al, so we have a solution but since disc brakes require a higher PSI than drum the #DM62VR would not work on drum brakes. Instead you'd want to go with the part #DM72VR which is basically the exact same thing but made for drum brakes. You can…
view full answer...The big differences is basically pricing and brands. The part #AKFBBRK-35-D is a pair of Dacromet coated drum, hydraulic brakes that are free-backing. The part #40716-15 is essentially the same thing buy made by Demco. The etrailer brand is going to…
view full answer...You will need either the Replacement Inner Member #DX97FR for tandem axle drum brakes or the #DX99FR for a tandem axle with disc brakes. The capacity was increased on the A-60 from 6,000lbs to 7,500lbs which is why you see the higher rating on the…
view full answer...