Customers compare DM15931-95 to these similar products
Products Featured in this Video
Today we're going to take a look at the Demco EZ-Latch Channel Tongue Trailer Coupler for the two and 5/16 diameter hitch ball. This one has a 21,000 pound weight capacity. Now this is a straight tongue coupler, it's made of a sturdy steel construction, it has a nice zinc finish on it. Offers corrosion resistance. It does meet the 200 hour salt spray rating, and it is a channel tongue coupler that… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…
view full answer...The only difference in the Demco Channel Tongue Trailer Couplers #DM16080-95 and #DM15931-95 is going to be the bolt pattern. One will have the 5-Bolt hole pattern and the other is going to have 4-Bolt holes. I have included images below showing the…
view full answer...I currently have three diffrent self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes which are attached for you below. eTrailer Electric Trailer Brake Kit part #AKEBRK-35-SA (3,500 Axles) Dexter…
view full answer...I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…
view full answer...A drum, or hub and drum, is not included along with the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-468-469. These are 3,500 lb electric trailer brakes that fit a 10 inch drum, so if you do need a new hub and drum I have added a link below to…
view full answer...Since the mounting holes of the Demco Coupler part #DM15931-52 are 1/2 inch in diameter you'd want to source 1/2 inch diameter bolts Grade 5 or higher. Go with bolts and nuts long enough to fit through coupler.
view full answer...We would definitely be able to upgrade to a higher capacity Leaf Spring or Silent Ride set up. That being said, we do not carry torsion axles, so we do not have a bolt on upgrade available. The axle #8327820-EB would upgrade you to 5,200 pounds per…
view full answer...I spoke to my contact at Way Interglobal about the Everchill Refrigerator part #324-000119. They informed me that upon startup and until the set temperature is reached, the unit will draw 8-9 amps. Once the set temperature is reached, it will draw…
view full answer...We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…
view full answer...The lockout feature does not apply to fixed trailer couplers such as the Demco A-Frame Trailer Coupler w/ Jack Hole part #DM14793-97. The lockout feature only applies to surge brake actuators and the ability to close the proportioning valve so that…
view full answer...It's not needed to glue the bunk board carpet like #CE11349 as well as staple it. With just staples you'd be fine.
view full answer...Pressure treated lumber can be used for bunk boards along with bunk carpet like the #CE11349. However, it is possible that some corrosion may occur from the chemicals in the lumber over time. The CE Smith bunk boards like #CE27840 are made from…
view full answer...