Straight-tongue coupler is made of sturdy steel with a silver powder coat finish, ideal for marine applications. eZ-Latch ensures fast, easy, secure hookup and disconnect. Designed to bolt onto your 3" wide trailer tongue. 4-Hole bolt-on case.
Features:
Specs:
This coupler features a simple-to-use latching mechanism known as the eZ-Latch. With this mechanism, hooking up is as easy as dropping the coupler over your trailer hitch ball. The latch does not need to be tugged or manually activated to allow the ball into the coupler socket, nor does it have to be secured in place. Just make sure that the coupler is properly lined up with the ball when you lower it, and the rest is automatic. Disengaging the coupler is just as effortless. Simply lift up the handle and the coupler socket will automatically release its grip on the ball.
The contoured, low-profile design of the latch handle helps protect the coupler from damage by allowing any potential hazards - from debris on the road to your ball mount backing into the coupler - to simply slide over the top. This helps prevent anything from getting under the latch handle and releasing the ball, and it can also limit any damage to the coupler should an impact occur.
Unlike most couplers, which have a pin hole through the handle latch, the eZ-Latch coupler features a hole through the side of the coupler itself. Inserting a coupler lock through this hole will keep the latch from lifting, preventing disconnect and theft.
Sturdy, Corrosion-Resistant Construction
Made of sturdy steel, this straight-tongue coupler features a durable silver powder coat finish that is designed to limit rust and corrosion. This coat has a 500-hour salt spray rating, making the coupler perfect for marine use. The eZ-Latch's sleek, ergonomically designed handle is constructed of a durable composite material that's corrosion-proof, allowing it to withstand whatever the road and the elements dish out.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Dem co EZ Latch Channel Tongue Trailer Coupler, for a two and five-sixteenths diameter hitch ball, and has a 21,000 pound weight capacity.Now this straight tongue coupler is made of sturdy steel construction, has a nice silver powder coat finish over it to offer excellent corrosion resistance. It does meet 500 hour salt spray rating so it's great for marine applications.The channel tongue coupler will let you hook up to your trailer to tow your vehicle. And again, it provides the connection point right up here for your two and five-sixteenths diameter hitch ball.Now the nice feature on this is is it uses the easy latch coupler mechanism to ensure a nice, fast, simple, secure hookup and disconnect. This will basically let you hook up when the latch is in the closed position. All you have to do is just drop the coupler over the hitch ball and the latch will snap into place.Just to demonstrate that I happen to pull a two and five-sixteenths diameter hitch ball. So you can see when you put it over there and then you push down, it'll automatically latch onto it, snap into place and hook to your hitch ball, just like that.To release it, all you do is pull up on this easy latch handle all the way and remove it right from the hitch ball.
So simple as that. So with this latch closed, all you have to do is put it on there, push down, and it locks into place.Our handle on this is a corrosion proof polymer, nylon resin latch handle. It's durable, impact resistant. And if you want to lock this to your hitch ball, this hole right over here is a five-sixteenths diameter hole. It'll allow a five-sixteenths diameter coupler lock pin to slide through there, come through the other side, put the lock on it.
Keep anybody from removing your coupler from your hitch ball. Now the minimum span that's needed on the coupler lock is going to be that width, which is about three inches.This is a bolt-on installation. You can see right back here as the four bolt holes right here on the case. Now the installation hardware to install this are not included. These parts are made in the USA.
Again, the mounting on this, it's designed to fit onto a three inch wide straight channel coupler. So you can see if we put a ruler on that, measure the inside, it's right at three inches. The hitch ball size this fits on is a two and five sixteenths diameter. And the weight capacity is 21,000 pounds.But that should do it for the review on the Dem co EZ Latch Channel Tongue Trailer Coupler, for two and five-sixteenths diameter hitch ball.
Average Customer Rating: 4.9 out of 5 stars (7 Customer Reviews)
Straight-tongue coupler is made of sturdy steel with a silver powder coat finish, ideal for marine applications. eZ-Latch ensures fast, easy, secure hookup and disconnect. Designed to bolt onto your 3" wide trailer tongue. 4-Hole bolt-on case.This trailer coupler is exactly what I was looking for. Heavy duty coupler, easy to lock and unlock. I highly recommend this product if you are looking for a great coupler
Demco make great strong product
Demco Channel hitch is great, it I the only one for me, easy latch, easy unlatch.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.