Customers compare C37CR to these similar products
Products Featured in this Video
Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this CURT 44 inch wide class V universal weld-on hitch with the 2 1/2 inch receiver and the mounting brackets. Now, this is a universal hitch that's designed for use on service body trucks and utility body trucks. So, it is great for use on the trucks that have the utility boxes. It does include these heavy-duty,… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The trailer hitches we have available for the 2014 GMC Savana Van are designed to fit the full size van model. To see if these will fit your Cutaway version, I just recommend taking a couple measurements on the vehicle's frame. The trailer…
view full answer...I do have an option for you but the Curt Trailer Hitch Receiver part #C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit your 2009 Volvo D13. However, what you can use is…
view full answer...When it comes to installing a trailer hitch on your 2000 MCI 40 foot Intercity Bus we do not have a custom hitch that would fit but you can weld on The Curt Class 5 Universal Weld-on Hitch w/ Brackets - 2-1/2 inch Receiver - 44 inch Wide #C37CR.…
view full answer...The Draw-Tite Class III hitch you mentioned, part #41946 will fit a 2005 Chevy Express, but I couldn't say if it'll fit a motorhome on a cutaway van chassis. Usually the rear bumper structure at the rear of a motorhome is much…
view full answer...I went to the warehouse and measured the Curt Trailer Hitch Receiver, part #C15703. I have attached a photo of the trailer hitch and have noted the dimensions you can check out. This is a Class V trailer hitch and it has a 2-1/2 inch receiver…
view full answer...The Curt Trailer Hitch Receiver #C15845 is a custom fit application for a 2008 Ford F-350 Cab and Chassis like what you have. I'm not 100% sure what all comes on the Knapheide 6108D54J1 Service Body so I'm attaching a photo of some of…
view full answer...There are no steps specifically made for a tractor, but there may be an option for you. The Carr Mega Step Fold-Up Truck Step #CARR190001B can work if you have a 12" long x 5-3/4" tall space for the mounting plate. I have added a…
view full answer...The Buyers Products 2" Hitch Receiver For GM Express/Savana with Cutaway Chassis part #3371801102 will fit the frame just fine on a Chevy 3500 Shuttle Bus but the bumper is where things can cause problems as not all hang down the same…
view full answer...There is possibly an option for a trailer hitch that fits your 2004 Holiday Rambler, and I say possibly because while a custom fit hitch is not available, there are universal weld-on hitches. This depends on the width of your frame from outside to…
view full answer...We have the Curt hitch part #C15845 which fits your 2016 Ford F-450 Cab and Chassis and is a 2-1/2 inch trailer hitch. This has a capacity of 20,000 lbs too.
view full answer...While we do not carry the Dexter 7K P-12 Model SLR axle that you mention, I do still have another potential alternative for you. Instead, a great alternative is to go with the Timbren Axle-Less Trailer Suspension System #TASR7KS01. This system will…
view full answer...The mounting brackets on the Curt Class 5 Universal Weld-on Hitch #C47CR do need to be in that upright position so while this hitch can technically fit with your motorhome chassis, you'll need to get creative on how to properly weld the…
view full answer...