Fit of Curt Class III Trailer HItch # C13087 on 1999 Toyota 4 Runner

Question

Question:

Hi, I'm currently shopping for a tow hitch for my 1999 Toyota 4Runner. Your website offers the Curt receiver hitch 13087 CURT Class 3 Trailer Hitch Receiver and Id like to confirm that this will not require any drilling at all. In terms of installation, that it will line up with the pre-drilled frame and will only require securing with bolts and nuts. In case of misfit, what will be the policy for getting another product that fits. Thanks

asked by: Jack

0

Expert Reply:

I have confirmed with Curt Manufacturing that the # C13087 is indeed a fit for your 1999 Toyota 4Runner and that no drilling is required. The hardware uses existing holes to attach the hitch to the vehicle frame. In the unlikely event that you would have some difficulty with the installation, you can give us a call and we would be happy to walk you through the installation. I have linked you to our return policy.

You might also need the following to complete your towing set-up.

Trailer wiring harness with 4-pole trailer connector, part # 118341
Ball mount, part # C45010
2 inch trailer ball, part # 63845 or 1-7/8 inch ball, part # 19260
Locking hitch pin, part # e98882

expert reply by: Mike L

0

Answer 1

I attached a picture that has the install instructions for the Curt hitch #C13087 that you have as well as a link to them on this page as well. Sometimes the instructions are stuffed down the hitch tube opening which can make them harder to find.

view full answer...

Answer 2

The Draw Tite Hitch part #75091 is confirmed to fit your 2001 Toyota 4Runner and we had a customer write in a review saying that this hitch installs without any interference with the factory spare tire. The instructions for this product indicate that…

view full answer...

Answer 3

When the manufacturer tests the fit of a hitch like the Draw-Tite #75091 they do not test for larger spare tires. From what I have found, the #75091 is about the same as the OEM hitch and leaves very little room for your typical spare tire. That…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

view full answer...

Fit of Curt Class III Trailer HItch # C13087 on 1999 Toyota 4 Runner

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching