Spare Hub And Bearings For A Kodiak Rotor/Hub 133-7K-8
Question:
Hello, I need help determining all the parts for a spare hub and assembly. I need a rotor, bearings, seals, cotter pin, axle nut, and cap. The only information I have is the numbers on the rotor: Kodiak Rotor/Hub-133-7k-8. Can you help me please pull all the part numbers together to have a backup spare for everything required. This is for a boat trailer so the proper finish as well. Thanks!
asked by: Alex
Expert Reply:
Hey Alex, thanks for providing that part number. You may already know this, but what you have are the standard Kodiak 7K rated 8 lug hub and rotor assemblies. We have all of the parts you need, and I have listed those for you below.
- Hub/Rotor Assembly # KRH1378D
- Bearing Kit # DBRKHW7
- Cotter Pin # 165649
- Spindle Nut # 165686
The aforementioned bearing kit will include your seals and grease caps. Keep in mind the bearing kit comes with enough for two axles. All of the other parts above are sold individually. Also the hub has a dacromet coating which has good rust resistance and it intended for marine use.
Products Referenced in This Question
Cotter Pin - 1/8" Thick x 1-3/4" Long
- Accessories and Parts
- Trailer Suspension Parts
- Cotter Pin
- ABS Fasteners
more information >
Bearing Kit for Trailer Brakes with 13" Hub/Rotor and 1/2" Bolts - 7,000 lbs
- Accessories and Parts
- Trailer Hubs and Drums
- Bearing Kits
- 7000 lbs
- Bearing 25580 and 14125A
- etrailer
more information >
Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 1/2" Bolts - 7,000 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Raw Finish - 1/2" Bolts - 7,000 lbs
- Trailer Hubs and Drums
- Hub with Integrated Rotor
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Continue Researching
- Shop: Bearing Kit for Trailer Brakes with 13" Hub/Rotor and 1/2" Bolts - 7,000 lbs
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - E-Coat - 1/2" Bolts - 7,000 lbs
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Dacromet - 1/2" Bolts - 7,000 lbs
- Shop: Kodiak 13" Hub and Rotor - 8 on 6-1/2 - Raw Finish - 1/2" Bolts - 7,000 lbs
- Shop: Chrome Trailer Wheel Lug Nut - 1/2" - Qty 1
- Search Results: bearing kit
- Search Results: 1/2 lug nuts
- Search Results: 25580
- Shop: Trailer Hitch
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Most Popular Wheel Bearings
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Trailer Wiring Diagrams
- Video: etrailer Electric Trailer Brake Kit Installation
- Search Results: 44649
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: Gooseneck Hitch
- Search Results: 68149
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Brake Controller
- Search Results: lug nut
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: dust cap
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Fifth Wheel Hitch
Alex B.
3/27/2024
Hello- I went to order these parts today and realized the rotor is about 5 weeks out. Is there an option for a different version I can get sooner? Thanks