Correct Electric Brakes and Hub/Drum Assemblies for an AL-KO 70275 3,500 lb Axle
Question:
Can you help me find the correct brake kit for an Alko 70275 axle. I am looking to add electric brakes. Thank you
asked by: David K
Expert Reply:
Thanks for the photo!
It looks like you have a 3,500 lb axle so the brakes and hub/drums you need for adding electric brakes to your axle are the following:
Electric Brakes
- etrailer Electric Trailer Brakes # AKEBRK-35-SA
Hub/Drum Assembly
- Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 # AKHD-545-35-EZ-K
- Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 # AKHD-655-35-EZ-K
You just need to make sure you get the hub/drums that match your bolt pattern and you'll be good to go!
It sounds like you don't already have electric brakes so you'll also need the following to get your electric brakes installed.
- Junction Box and Installation Kit # 3430001-JBK
- 7-Way Molded Trailer Wire Connector # H20043
Attached is a helpful article about adding electric brakes to a trailer as well!
Products Referenced in This Question
Junction Box and Installation Kit for Autowbrake Trailer-Mounted Electric Brake Controller
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- Junction Box
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
7-Way Molded Trailer Wire Connector, 4' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: 7-Way Molded Trailer Wire Connector, 4' Long
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Junction Box and Installation Kit for Autowbrake Trailer-Mounted Electric Brake Controller
- Search Results: trailer brake wire
- Search Results: 44649
- Shop: Trailer Hitch
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 68149
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Wiring
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Shop: Grease Seals 10-36 (pair)
- Shop: Brake Controller
- Search Results: 25580
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Shop: Fifth Wheel Hitch
- Search Results: brakes
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Shop: Gooseneck Hitch
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: Recommended Dexter Suspension Kit 7753400
- Search Results: dust caps