How to Bleed Air from the Titan T43397007K Zinc-Plated Brake Actuator
Question:
hi just installed the Titan model 60zx7000 and after filling the reservoir with brake fluid i actuated the hitch and no fluid is coming out of the port for the brake line? Please advise as if there is something else that i need to do? Thank you
asked by: Thomas N
0
Expert Reply:
The Titan Zinc-Plated Brake Actuator item # T43397007K has a plunger you can access for purposes of bleeding the system of air. You will want to remove the plate that surrounds the breakaway lever to access it. You can then manually push the lever to pressurize the system. This should force fluid to run through the lines.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 1-7/8 Inch Ball Coupler
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement for Atwood Surge Brake Actuator 82541
- Q&A: Surge Brake Actuator Recommendation to Replace Fulton A60 on Trailer
- Q&A: Best Replacement for Atwood 82543 Brake Actuator
- Q&A: Can the Replacement Atwood Master Cylinder 85736 Still Be Obtained
- Q&A: How to Keep LED Turn Signal Lights on Toolbox From Flashing with Brake Pedal Pressed
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)