Can Curt Multi Fit Hitch # C13702 Install on Travel Trailer

Question

Question:

Can I put this receiver hitch on my Travel Trailer?

asked by: Mark P

1

Helpful Expert Reply:

The Curt Multi Fit Hitch part # C13702 can be installed on travel trailers as long as the distance between the frame is 18 and 51 inches and it's either a c-frame or a boxed frame.

expert reply by: Jameson C

1

Answer 1

I spoke with our contact at Curt and he informed me that for the Curt Adjustable Width Trailer Hitch Receiver for RVs, part #C13702, it is not recommended to mount this onto your RV's I-Beam. The reason for this is that when mounting a…

view full answer...

Answer 2

Best option for adding a trailer hitch to the rear of a 5th wheel camper like what you have will be a multi-fit hitch designed for a range of frame widths and styles. For that we have the Curt #C13702 which fits box frame, C-channel frame, or…

view full answer...

Answer 3

The distance from the two bolt holes on each side bracket for the Curt Adjustable Width Trailer Hitch Receiver #C13702 is right at 8-5/8" (center to center). I have also attached a diagram to assist. This adjustable hitch will fit frame…

view full answer...

Answer 4

If the door hinge on your 2005 Winnebago Vectra has a similar design then yes, the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf #LC95VR will work as a replacement. This is a universal product that has an overall length of…

view full answer...

Answer 5

The best tow dolly we offer is the Roadmaster Tow Dolly with Electric Brakes part #RM-2050-1. Dolly includes all lightging as well for DOT compliance. The only thing one would need to use this dolly is a trailer connector like part #PK11604 for a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, if you plan on bolting the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR on then you would need to drill holes in the adjustable arms in order to set them to the correct length. There aren't any predrilled so that this one…

view full answer...

Answer 11

Thanks for the pictures! 2" hitches do not all have a 5,000 lbs capacity. The capacity varies by vehicle. That is an old Reese 06497 hitch and the sticker is correct. It does indeed top out at 3,500 lbs. It looks like this hitch came on all of…

view full answer...

Answer 12

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

view full answer...