Replacement Surge Brake Actuator For a Trailer With Dico/Titan Model 60 Drum Brake Surge Actuator
Question:
Is this a good replacement for my 1998 DICO/TITAN Model 60 surge drum brake actuator? Old one is rated 6000# and for 3500 lb axles. I plan to use brake kit Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10inch - Left/Right Hand Assemblies - 3.5K Item # AKUBRK-35-D, so I dont want/need any reverse lockout. Its a 3inch wide trailer frame. Id like to get a compatible brake line kit as well if you can recommend one. Its a 25foot trailer with tandem axles with brakes on just one axle approximately 15-18 back from actuator. Maybe Kodiak Hydraulic Brake Line Kit - Single Axle - 18 Item # 18SI-BLKIT ? thanks very much for your advice.
asked by: Dave
Helpful Expert Reply:
The Dexter Zinc-Plated Brake Actuator # T43397007K is a replacement for the DICO/Titan Model 60 actuator. As Dexter bought Titan this is now their version of the Model 60 actuator. This will work with the Hydraulic Trailer Brake Kit # AKUBRK-35-D but those are not free backing brake assemblies. The Brake Kit # AKFBBRK-35-D are the free backing brakes so you will not need an Electric Actuator # T4748800 to prevent the brakes from locking up in reverse.
The Kodiak Hydraulic Brake Line Kit # 18SI-BLKIT is a great option as it uses flexible line along the entire kit. This will help prevent the lines from becoming damaged or kinked during the install.
Products Referenced in This Question
Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Accessories and Parts
- Brake Actuator
- Trailer Brakes
- Disc Brakes
- Hydraulic Drum Brakes
- 18 Feet Long
- Brake Lines
- Flexible Brake Hose
- Brake Line Kits
- Single Axle
- Kodiak
more information >
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid
- Valve
- Dexter
more information >
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 1-7/8 Inch Ball Coupler
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Replacement For Fulton Drop-Leg Stabilizer Jack
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Brake Controller and 7-Way Install on 2013 Chevy Express w/ Tow Pakage
- Q&A: Replacement Fan Recommendation for the MaxxAir 4700K
- Q&A: Charging Auxiliary Battery from Car Cigarette Lighter or 12 Volt Auxiliary Plug Connector
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure