Replacement for 94" Long 3,500 Pound Lippert Axle
Question:
Im looking for this axle to make my trailer a tandem axle trailer this is the axle that is under the trailer now LC135-SI-94-81-NOSP-US-L-550-7242 V000113565
asked by: Eric L
Expert Reply:
It looks like your current axle is a 3,500 lb axle that measures 94" hub face to hub face with an 81" spring seat measurement. Although we do not have a 94" axle, you can use the Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs # e68GR which will stick out 1/2" farther on either side but not cause an issue. This axle will also work with the # AKHD-545-35-EZ-K you looked at.
One thing you will need to do is cut off the spring seats and weld on new ones like the # TRSS238 to match the 81" measurement on your other axle. You will also need a hanger kit like the Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear # APT5 and U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts # APUBR-1.
You will also want leaf springs that are the same length and capacity of your current leaf springs. I have included a link to our available 3,500 lb double-eye leaf springs below. I have also attached some helpful articles on trailer suspension and axle placement for your reference.
Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- Dexter
more information >
Trailer Axle Beam with Easy Grease Spindles - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 80 Inch Long
- 95 Inch Long
- No Drop or Lift
- etrailer
more information >
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 2-3/8 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: MORryde ALLTREK 4000 Tandem Axle Trailers Shock Absorbing Equalizers Review
- Shop: MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Search Results: axle flip kit
- Shop: Front Mount Hitch
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Search Results: alltrek4000
- Search Results: drop axle
- Q&A: Determining Axle Position and Wheel Base for Trailer
- Shop: Lippert Electric Tread Lite Step for RVs - Double - 8" Drop/Rise - 23-3/4" Wide - Aluminum
- Shop: HappiJac Electric Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs
- Search Results: electric camper jacks
- Search Results: 5th wheel jacks
- Shop: Dexter Trailer Axle Beam with E-Z Lube Spindles - 94" Long - 7,000 lbs
- Shop: Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Search Results: tsw~19
- Search Results: axle spring seat
- Q&A: 95" Long Axle With 80" Spring Center With Electric Trailer Brakes and a 5 on 4-3/4" Bolt Pattern
- Q&A: Distance From Brake Flanges on Trailer Axle Beam 95" Long - 3,500 lbs
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: How to Tell If MORryde Rubber Equalizers Will Fit Trailer
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Suspension Enhancement
- Article: Trailer Tire Sizing