Compatible Class III Trailer Hitch Receiver For A 2022 Hyundai Tucson Plug-In Hybrid

Question

Question:

Does either the Curt or Draw tite Class 3 hitch work for the 2022 Hyundai Tuscon Plug-in Hybrd? I think it says all styles, just wanted to know for sure.

asked by: Keith

0

Expert Reply:

Both the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C94WR and Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT22MR are confirmed to fit all models of the 2022 Hyundai Tucson. Both hitches have a maximum gross trailer weight capacity of 3,500lbs and maximum tongue weight capacity of 525lbs. The only real difference between the two is that Curt manufactures their hitches in the US and are known to have a much stronger and reliable powder coating than their competitors to resist rust and corrosion. Because of the powder coating sustainability of the # C94WR I would choose it over the # DT22MR.

If you don't already have the trailer wiring harness and 4-wire plug connector then you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # CU94FR. This T-Connector plugs directly into existing wiring with no cutting, splicing or tapping required. The powered Converter reduces strain on wiring system. I've attached a video of a similar vehicle to walk you through the steps of installing this wiring harness if you choose to do it yourself.

I also recommend the etrailer Ball Mount Kit for 2" Hitches - 7,500lbs # 989900 as it comes with a 1-7/8" Ball and 2" Ball and offers a drop of 2" or 4" and a rise of 1" or 3" to help you tow multiple different trailers or other ball mounted accessories.

expert reply by: Kevin C

0

Answer 1

Yes, it will. I checked with our manufacturer and I can confirm that the etrailer Hitch item #e38KR fits all models of the 2023 Kia Sportage included the PHEV model. This hitch is custom fit and bolts to your Sportage with included hardware.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 7

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Compatible Class III Trailer Hitch Receiver For A 2022 Hyundai Tucson Plug-In Hybrid

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching