Replacing Hubs On a 4' X 6' Carry On Trailer From 4 on 4" Lugs to 5 on 4-1/2" Lug Pattern 15" Wheels
Question:
I have a 4 X 6 Carry On trailer with 4 bolt hubs. I would like to change the hubs to 5 bolt to allow 15inch wheels and tires. I am removing and replacing the fenders to facilitate the larger size. I am NOT looking to increase capacity, just get a better ride and use existing 15inch wheels I already have. Are there hubs available that will just swap out the existing to allow this? Thanks for any help or advice you can give me.
asked by: Bill
Expert Reply:
Your current axle on your 4' X 6' Carry on Trailer will likely have either a BT8 Spindle # TRU59FR or BTR Spindle # TRU44FR. You can determine the spindle by removing your current hub and inspecting the bearings or by measuring the spindle itself. I have included a image that shows the locations of the bearing numbers and grease seals on your current hub as well as the measurement points for spindle as well.
The BT8 Spindle # TRU59FR uses Bearings # L44643 which have an inner diameter of 1". The Grease Seal # 34823 has an inner diameter of 1.25". If these are what you have then the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-LFEZ-1K is your replacement idler hub.
The BTR Spindle # TRU44FR uses Bearings # L44649 which have an inner diameter of 1.063". The Grease Seal # 10-9 has an inner diameter of 1.5". If these match what you have the Easy Grease Trailer Idler Hub # AKIHUB-545-2-LFEZ-2K is your replacement idler hub.
Both hub assemblies come with bearings, races, and grease seal installed and packed with grease for a simple installation. If you find that your hub has different bearings or measurements on any of the components please let me know what parts you have and I can find you the correct parts. Also I assumed your 15" wheels are using the 5 on 4-1/2" lug pattern if yours are something different let me know.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Aluminum HWT Series S5 Trailer Wheel - 13" x 5" Rim - 4 on 4 - Black
- Q&A: Finding Correct Hub Bearings
- Q&A: Bearing Replacement Recommendation for Timken 07100
- Q&A: Spindle and Trailer Idler Hub For 2,000LB Trailer With 15", 5 On 4-1/2" Bolt Pattern Wheels
- Q&A: Trailer Hub for Boat Trailer with 3-1/2 Inch Deep Hub
- Q&A: Trailer Idler Hub for 2,000 Pound Axle and 13 Inch Tires
- Search Results: lug nuts
- Search Results: lug nuts
- Search Results: trailer wheels center caps
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Shop: Replacement Trailer Hub Bearing - L44643
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Shop: Americana Trailer Wheel Center Cap - Stainless Steel - 3.19" Pilot
- Search Results: akihub~545~2~g~1k
- Q&A: 7-Way RV Trailer Connector Wiring Diagram
- Search Results: hub
- Search Results: 53x12
- Search Results: 145r12
- Q&A: Availability Of Replacement Hub For Dico 45263
- Video: Kenda Tires and Wheels - Tire with Wheel - AM31202 Review