Finding Wiring Connectors for Trailer Wiring that Fits 2017 Ford Explorer

Question

Question:

I ordered the 118272 wiring harness for my 2017 Explorer. This harness is designed to disconnect a factor plug and as a splitter. When I went to install, my vehicle just had one female plug hanging down. What wiring harness do I need?

asked by: Tim S

0

Expert Reply:

If your 2017 Ford Explorer has one of the connectors for the # 118272 you have the other as well and it would be just a matter of looking further for it.

I attached an install video for this kit on a similar 2017 Ford Explorer for you to check out that shows you where you'll be able to find it.

expert reply by: Jameson C

0

Answer 1

Yes, the 7-way trailer connector part #118272 which is a confirmed fit for your 2017 Ford Explorer will be fully functional.

view full answer...

Answer 2

Installing a 7-way trailer wiring connector on your 2016 Ford Explorer is pretty easy actually. All you need is the part #118272 which plugs easily into a port under the rear of your vehicle. I attached a picture of what the connector looks like as…

view full answer...

Answer 3

If you do not have the trailer towing package on your 2017 Ford Explorer then you will want to install the Tekonsha T-One #118540 which will give you a 4-Way for your trailer lights. The Reese #74682 that you referenced is for Explorers with the…

view full answer...

Answer 4

Based on my research, the Explorers with a factory tow package came out of the factory with either a 7-way trailer connector or a 4-way connector. If you want a 4-way connector, I recommend using the Tow Ready T-One Vehicle Wiring Harness #118540. I…

view full answer...

Answer 5

Since you have the square connectors on your 2012 Ford Explorer the easiest solution to add a 7-way is the part #118272 that you mentioned. For a more cost effective solution though we have the #37185 that allows your current 4-way to plug in and…

view full answer...

Answer 6

The part #HM40975 is designed to fit the round 7-way connector that is found on several vehicles. To install it would require your vehicle to have this round connector. (see picture) If instead you needed a way to hardwire in a 7-way to a vehicle you…

view full answer...

Answer 7

Your 2016 Ford Explorer does include all the wiring needed to plug in a trailer connector. If you need a 4-way connector, the Tekonsha Wiring Harness #118540 is what you can use. This plugs in to the Explorer's wiring beneath the rear of the…

view full answer...

Answer 8

For your 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End #HM40975 if you like the double function and look, you can keep it. You will need to get the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer…

view full answer...

Answer 9

Since your trailer is brand new I suggest a visit to the selling dealer or to another authorized service/repair center. Small parts such as light lenses are easy to replace and inexpensive, but troubleshooting the blown fuse problem is not. Finding…

view full answer...

Answer 10

Your picture didnt make it through. Could you email it to me? I wonder if maybe you found wrong connector.

view full answer...

Answer 11

A sway control system will help reduce trailer sway caused by crosswinds and improper trailer loading. A sway control bar, like the Reese Friction Sway Control Kit #83660, will mount on your trailer's frame and to a sway control bracket #RP26005…

view full answer...

Answer 12

Your 2019 Dutchmen Coleman Lantern 263BH does come with electric trailer brakes. According to Dutchmen all of their units are equipped with trailer brakes. This means your vehicle will require an electric trailer brake controller if it doesn't…

view full answer...

Finding Wiring Connectors for Trailer Wiring that Fits 2017 Ford Explorer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching