What Does Harness on 2017 Ford Explorer Look Like for Trailer Wiring

Question

Question:

Attached picure

asked by: Cedrick B

1

Helpful Expert Reply:

Your picture didnt make it through. Could you email it to me? I wonder if maybe you found wrong connector.

expert reply by: Jameson C

1

Customer Picture
(click to enlarge)

Install Picture
(click to enlarge)

Cedrick B.

4/1/2021

Attached picure

Reply

Jameson C.

4/1/2021

Thanks for your picture. If you check out the second picture attached you can see that what you have is a harness with a cap that gets removed and the # 118272 installs inline with it.

Reply

Answer 1

Yes, the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600 would fit the Truxedo Elevate TS rails that you have.

view full answer...

Answer 2

The vehicle is unlikely to have the connector behind the dash unless it has the factory equipped 7-way on the rear bumper. If it does, the connector that the controller would plug into is clipped to the rear of the small cubbyhole or coin tray in the…

view full answer...

Answer 3

For the channels you have on top of your 1999 Chevy Silverado the Rhino Rack Vortex Aero bars part #Y02-490B-NT would be a great option that comes with everything needed to install 59 inch aero shaped bars.

view full answer...

Answer 4

For your Undercover SE Tonneau cover on your 2019 Chevy Colorado you can use the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 59" Long #Y02-490B will work by simply trimming the tracks as you mentioned. There…

view full answer...

Answer 5

From the sounds of your question, it sounds like you have factory track OEM rails on the roof of your 2015 Jayco 1207UD Say Series camper. If this is the case, I recommend the following parts: - Rhino-Rack Roof Rack for Factory Tracks - 2 Vortex Aero…

view full answer...

Answer 6

For your 2018 Nissan Titan XD I recommend the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. The kit comes with 4 quick mount legs that mount in the track system of your XR tonneau and…

view full answer...

Answer 7

Unfortunately, we do not have a harness for your 2014 Ford E-350 that will plug into the connector in your photo. For a replacement you can hardwire in the #HM40975-11998 to install a 7-way connector. You can either cut off the connector you have and…

view full answer...

Answer 8

Per our records, you purchased the #118540 harness. I checked with my contact at Tekonsha, who tells me that it sounds as if you have the #118540 harness you purchased plugged into the wrong connector under the vehicle. There is a gray connector and…

view full answer...

Answer 9

We have the Hopkins 4-way part #HM11140665 which is designed to fit the square connector you send in a picture of that would work well for you.

view full answer...

Answer 10

It is not necessary to wire a fuse inline of the brake controller circuit blue wire. In fact, if you did install a fuse and the fuse would somehow blow while your are in transit, you will loose your trailer brakes. The amperage that is sent to the…

view full answer...

Answer 11

On your 2002 Ford F-250 you will need to connect the Red wire to the Black wire on the brake controller for +12 Volts power and the Light Green wire to the Red Stoplight wire on the brake controller. The Dark Blue wire is connected to the Blue wire…

view full answer...

Answer 12

Yes, the 7-way trailer connector part #118272 which is a confirmed fit for your 2017 Ford Explorer will be fully functional.

view full answer...

What Does Harness on 2017 Ford Explorer Look Like for Trailer Wiring

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching