Availability of Replacement Installation Hardware For Curt C13295 Class III Hitch
Question:
Hey there, I have a C13295 class III hitch for a 2014 Ram Promaster 2500, and im in need of the parts kit hardware install kit for this. Can you help me understand how to obtain it? Thanks!
asked by: Vincent S
Expert Reply:
The Curt # C13295 is a confirmed fit for your 2014 Ram ProMaster 2500. You can obtain the replacement installation hardware by ordering part # RHK. Once you're on the linked product page, type 'C13295' into the provided field and choose 'Curt' from the drop-down menu.
To use the hitch for towing purposes, you'll also need a # 22112 trailer wiring harness with 7-way trailer connector or # 118618 if you only need a 4-pole trailer connector. You'll also need a ball mount like # C45010 and part # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball and a pin and clip # C45010.
The # 22112 harness allows you to install a Tekonsha brake controller like the # TK90160 Primus.
I've linked to the installation instructions and to an install video that you might find helpful.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter - 7 Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Replacement Hardware Kit for Trailer Hitches
- Accessories and Parts
- Trailer Hitch
- Hardware
- etrailer
more information >
Tekonsha Primus IQ Trailer Brake Controller - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 3 Axles
- LED Display
- Up to 90 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Installing a Brake Controller and a 7-Way Trailer Connector on a 2005 Ford F-150 With Factory 4-Way
- Article: Replacement Automotive Lighting
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: Can Trailer Tire Size 175/80-13 Replace Size 185/80R13
- Article: How to Replace or Install an RV Roof Vent
- Q&A: What is the Fuse Rating and Power Wire Gauge Used for Trailer Wiring Harness # 118571
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Q&A: Replacement Surge Brake Actuator For Trailer W/ Older Swing Away Actuator For Disc Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings