To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.9 out of 5 stars (225 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.The Hitch arrived in excellent condition and I immediately installed it.
Two things that I would like to comment. 1) The parts label was put onto the mounting plate instead of other places out of the way.It took considerable time to clean it off before the installation. 2) The installation instruction should add a consideration of moving the keyless entery LF antenna away from the center location of the bumper. If not, the new hitch will hit it.
Installed on my 2017 Ram Promaster.Takes about an hour with Wisconson Salt and rust on bolts. My local Ram dealership quoted me $1600.00 for hitch and wiring. etrailer soaked me about $175.00 without wiring. I'll install that later.If picture is shown Lic plate is subtle.
Trailer hitch arrived earlier than scheduled. It was exceptionally well-built and fit exactly onto rear bumper. Directions were good, and the wire provided to 'fish' the nut and washer through the bumper was superbly well-adapted for that task. Service agent on the phone prior to ordering was very helpful and courteous. Overall, I'm very happy with the product, its cost, and the support service provided.
Very good quality and easy installation
Watched the trailer install video; install was quite easy and quick. Looks great. Mainly for bike rack and occasional small trailer. Note: Hitch metal thickness pushes bumper out about 3/16 inch; When reattaching the bumper, you might add an expansion joint strip between the bumper and body to fill the small gap. Fits perfect!
This was delivered in a couple days. Boxed very well. I followed the video and everything was very easy to complete. If I had to point out one thing, it's very to find the torque specifications in the paperwork. Maybe it's the small print, and I missed it. Don't let that stop you from ordering. I will order again. Awesome job etrailer.
The hitch installed easily. I was able to most of the install by myself.
Cathy
10/10/2023
I have had no problems with the hitch. Initially we used it for bicycles, now it it used to hold the yakima box and bike carrier. It seems to be very sturdy.
Mike L.
11/2/2023
Has performed as expected. Installation was easy, and the instructions provided were excellent.
So far have only used it for a bike hitch but it's worked great! Not difficult to install.
Easy to install, high quality product. Fast shipping and great customer service
Product arrived quickly. Very easy to install. Was able to do it by myself. The install video was very good and helped speed up the install. One draw back is if you have the Promaster with a back up sensor like mine you will have to relocate the RF Antenna. It is in-between the the hitch and bumper.
super fast shipping. Was easy to put on. I am making a campervan Offroad van with my Promaster and wanted to put storage/bike/tow with it but didn’t have a hitch. This was the solution was super easy to put on,looks great. Made a custom bumper too that goes around it.
After being told by Camping World that a hitch was not available for my RV I found one on etrailer.com. The installation video was great. The price was fair. Shipment was quick. After only about one hour I had the entire hitch installed just as advertised. I could not be happier. Thank You trailer.com
We are adding the Laverne step to your hitch. Works great and far superior to the brackets supplied with the step. It would be great if this were an offering. We’d buy for our fleet, and I’d bet others would too.
No drilling, no cutting. The bolts provided were of correct length and thread for factory inserts. The receiver looks and performs like factory Mopar but at hundreds of dollars less.
Tools used: T30, 14mm 15mm 16mm sockets, torque wrench, Milwaukee 3/8 ratchet made quick work of the process.
Love everything about etrailer. Always have been correct on parts needed. Absolutely love the fact that they have videos on how to install things.
So I just recently went into business for myself decided to get a hitch so I can build a bumper guard to protect my rear bumper from forklifts super easy install only took about 30 minutes!
Overall a great product, and installation went smoothly. Be aware that since installation requires you to remove the bumper there is a good chance that you may strip or damage the existing screws and clips in the process, especially if your vehicle is a few years old and things have had time to corrode. I'd suggest picking up a few spares from the local auto parts store before you begin the disassembly process. Otherwise, you'll be stuck making an emergency trip with no bumper while the backup alarm screams at you because the sensors are disconnected (ask me how I know).
Installed myself very easy. Quality is high. Couldn't ask for more
First, let me start off by indicating that I originally bought the Draw-Tite hitch for the Ram Promaster 2500. The install went PAINFULLY long, and it turns out, something must have been wrong with the hitch. I spent 2-4 hours trying to get this thing to work. After several exchanges with eTrailer, they authorized a return, and I was able to place another order. This time I went with the Curt Class III hitch (basically same design). The hitch was installed in 30 minutes by myself! (I have done about 10 hitches with eTrailer over the years. This was BY FAR the easiest hitch I have ever installed. A big shoutout to eTrailer for making things right - for a brief moment, I thought they were losing a long-standing, repeat customer - but once the problem was escalated, they took care of things. Glad to know that customer service still is a thing. Would highly recommend this hitch... and the "only tricky" part of this install was threading a couple of bolts with rectangular washers - IT WAS SIGNIFICANTLY EASIER THAN THE DRAW-TITE HITCH, AS THE BOLTS WERE A FEW MILLIMETERS SHORTER AND THAT MADE IT COMPLETELY TROUBLE FREE. Hope this helps someone.
Absolutely easy to install!!!! Shipping was fantastic. I expedite over the road for time critical freight, and this is one of the main pieces that I need. Haven’t got the rest of what I need yet but I will try to give additional feedback later.
I would give it 5 starts if the product did not leave gaps between the bumper cover and the frame. I wish the manufacturer provide a rubber shims between them. (See pictures) Very easy to install.
Everything arrived without damage. Installation was straight forward. No issues.
The hitch was delivered on time and was a perfect fit. Installation was easy and quick! Thanks etrailer for great service and products.
This hitch fits promaster so nice and looks great the hitch was super easy to install. You can watch the video and not even look at the instructions that’s how easy it is to install
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dennis
12/28/2023
Easy installation, one year later we have no problems