Parts Needed to Convert 2004 Karavan 3100 with 3700 lb Axles to Electric Over Hydraulic Disc
Question:
I have an 2004 Karavan 3100 roller trailer with a Fulton A60 class 4 surge brake actuator for drum brakes on a swing away tounge and 14inch tires. I would like to convert it over to Electric disc brakes. The drum brakes are 5x4.5 3700lbs. What conversion kit do i need to make this happen? Thanks
asked by: James T
Expert Reply:
The 3,700 lb trailer axle makes thing a bit more interesting since the components for it are not always standard. So what I need from you is either the spindle dimensions where the bearings and seal rides or the bearing numbers that are in the hub. With that I will know for sure what parts you'd need to convert to electric over hydraulic disc.
Products Referenced in This Question
Hydrastar Electric-Hydraulic Actuator w/ Line Kit for Disc Brakes - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- 1600 psi
- Disc Brakes
- Hydrastar
more information >
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 1-7/8 Inch Ball Coupler
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Replacement for Atwood Surge Brake Actuator 82541
- Q&A: Surge Brake Actuator Recommendation to Replace Fulton A60 on Trailer
- Q&A: Best Replacement for Atwood 82543 Brake Actuator
- Q&A: Can the Replacement Atwood Master Cylinder 85736 Still Be Obtained
- Q&A: How to Keep LED Turn Signal Lights on Toolbox From Flashing with Brake Pedal Pressed
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
James T.
9/11/2020
I have an 2004 Karavan 3100 roller trailer with a Fulton A60 class 4 surge brake actuator for drum brakes on a swing away tounge and 14inch tires. I would like to convert it over to Electric disc brakes. The drum brakes are 5x4.5 3700lbs. What conversion kit do i need to make this happen? Thanks