Replacement Coupler Recommendation for an Atwood 83000 on an A-Frame Trailer
Question:
I am finding that there arent replacement parts for this model. Mine is welded into, not over see pic. If i cut it out, would the Titan bolt into place or weld in or is there a different model designed to replace this type of configurations. BTW, the boat is about 3800 lbs and the trailer another 1000ish so the actuator is overkill at 8000lbs...i would think. just need something that fits!
asked by: Mitch
Expert Reply:
We do have one a-frame coupler, part # DM8609502 available and it is rated for 8,000 pounds, I think this would be the best fit for your trailer. The Titan coupler that you referenced is designed to bolt directly on a the trailer tongue.
This is a weld on coupler and fits trailer with a 50 degree a-frame, which is the most common angle for a-frame trailers, and has a 2 inch trailer ball coupler.
If you were to cut out your existing coupler, this one should weld on over the a-fame of your coupler. It is primed to prevent rust so to weld it on you would need to prepare both surfaces as needed.
Products Referenced in This Question
Demco Hydraulic Brake Actuator - Drum - Primed - A-Frame - 2" Ball - 8,000 lbs
- Brake Actuator
- Surge Brake Actuator
- A-Frame Coupler
- Weld-On
- 8000 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Demco
more information >
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Drum - Multi-Fit Ball - Bolt On - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 1-7/8 Inch Ball Coupler
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Shop: Demco Hydraulic Brake Actuator - Drum - Primed - A-Frame - 2" Ball - 8,000 lbs
- Q&A: Can Electric Brakes Replace Hydraulic Brakes on a 1995 Jayco Eagle
- Shop: Loadstar K399 Bias Trailer Tire - 205/65-10 - Load Range E
- Video: Demco Brake Actuator - Surge Brake Actuator - DM8609502 Review
- Q&A: A Frame Surge Brake Recommendation for Replacing Atwood Brake Actuator
- Shop: Tool Box
- Search Results: dexter brake line kits
- Search Results: 9579~2
- Search Results: brake line kit
- Search Results: 80910
- Video: Dexter Axle Trailer Brakes 9504 Review
- Q&A: Will the Hydraulic Line Kit 80910-T fit a 1995 Jayco Pop Up
- Q&A: Replacement Flexible Brake Line Hose for a Trailer with Torsion Axles
- Shop: Demco Hydraulic Brake Actuator w Drop - Drum - Primed - A-Frame - 2" Bulldog Coupler - 7,000 lb
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Hydraulic Line Kit - Single Axle - Drum
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Most Popular Wheel Bearings
- Video: Trailer Brakes and Wiring Installation
- Video: etrailer Electric Trailer Brake Kit Installation AKEBRK-2
- Video: Cleaning and Replacing Hubs and Bearings
- Video: Dexter Electric Trailer Brake Kit Installation 23-26
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Brakes Needed for 1995 Jayco Pop Up Series 1207
- Q&A: Are Replacement Parts Available for an Atwood Surge Brake Coupler?
- Q&A: Replacement Surge Brake Actuator For a 2003 Jayco Qwest Pop Up Camping Trailer
- Search Results: 44649
- Shop: Trailer Hitch