Air Bags For 2018 Sierra Denali With 6" Under Leaf Spring Block Lift

Question

Question:

Hello, I have a 2018 Sierra 1500 Denali 4X4 with a 6 inch BDS lift with blocks in the rear. will this system work with a lifted truck?

asked by: Jason P

0

Expert Reply:

I do have an option for you but the Air Lift Ride Control Air Helper Springs part # AL59565 will not install with a block lift under the leaf spring.

I recommend to use the Firestone Ride-Rite Air Helper Springs part # F2430 which will work with the 6" block lift if you use spacers as confirmed by Firestone. The Firestone bags are more durable and less prone to punctures compared to the other brands available. You can measure for the correct size spacer with the truck on level ground without any weight in the bed. Measure from the top bracket to the bottom bracket where the air bags attach. I have attached the spacers available depending on the amount of space between the bottom and top bracket. The spacer will install between the lower bracket and the bottom of the air bag.

6.5" to 7.5" - part # F2536
7.5" to 8.5" - part # F2366
8.5" to 9.5" - part # F2368
10.5" to 11.5" - part # F2373
11.5" to 12.5" - part # F2374

I recommend to add an air compressor kit to make inflating the bags more convenient. For that, I recommend the Firestone Air Command I part # F2158 which is a standard analog gauge compressor system that allows you to inflate both bags at the same time. This will require extending air lines to the cab. If you want a wireless system that doesn't require air lines to the cab for an easier install, I recommend the Air Lift WirelessONE Compressor System for Air Helper Springs part # AL25980EZ which includes an easy U-bolt no drill install without air lines to the cab because of the included wireless remote.

expert reply by: Heather A

0

Answer 1

The Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle #AL57289 will not require spacers with a lift under 2 inches. If you have under a 2-4 inch lift use #AL52420 and if you have 4-6 inch lift use #AL52420.

view full answer...

Answer 2

For your 2007 Nissan Titan SE 5.6 with a 4inch lift, you will need an adapter to use the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle, #F2355. You will need the Lift Spacers for Firestone Ride-Rite Air Helper Springs -…

view full answer...

Answer 3

It sounds like you're going to need the Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 4" Lift - Qty 2 #AL52440, which is the 4" lift spacer.

view full answer...

Answer 4

You will need to get under your 2016 Ram 1500 with a 6” lift and look at the upper mounting bracket where the Air Lift LoadLifter 5000 Ultimate Air Springs w/ Internal Bumpers item #AL88365 attaches. If this bracket is angled, like the attached…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 12

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Air Bags For 2018 Sierra Denali With 6" Under Leaf Spring Block Lift

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching