How to Prevent Sag While Towing with a Lifted 2013 Toyota FJ Cruiser
Question:
will this product accommodate the lift of 2.5 in the rear suspension? i have a travel trailer and it sags in the rear when i tow. please advice
asked by: Adrian
Expert Reply:
As long as you are using the factory coil springs on your 2013 Toyota FJ Cruiser then the 2-1/2" lift kit you have in the rear will not be a problem. If you have a set of taller/stiffer aftermarket coil springs then you would need to test these for yourself as the manufacturer does not test fit with aftermarket coil springs, just the factory ones.
If it turns out that you do have aftermarket coil springs and the airbags won't work then we still have an option for you in the Timbren Rear Suspension Enhancement System part # TTORSEQ. However, you will need to purchase spacers to make up for the lift kit you have, part # TA25723-90AD00 for 1" and part # TA25722-90F00 for 1/2". You can use multiple spacers, up to six per side.
I have attached an install video of the Timbren's for you as well.
Products Referenced in This Question
Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing
- Accessories and Parts
- Vehicle Suspension
- Spacers
- Lift Spacers
- Timbren
more information >
Timbren 1" Spacer For Raised Frame Vehicles - 1/2" Bushing
- Accessories and Parts
- Vehicle Suspension
- Spacers
- Lift Spacers
- Timbren
more information >
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Jounce-Style Springs
- Extra Heavy Duty
- Timbren
more information >
Product Page this Question was Asked From
Air Lift 1000 Air Helper Springs for Coil Springs - Rear
- Vehicle Suspension
- Rear Axle Suspension Enhancement
- Air Springs
- Light Duty
- Air Lift
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Towing Mirrors
- Shop: Suspension Enhancement
- Video: Timbren Vehicle Suspension TA25723-90AD00 Review
- Video: Timbren Rear Suspension Enhancement Installation - 2012 Toyota 4Runner
- Shop: Transmission Cooler
- Q&A: How to Add Sway Control to a Weight Distribution System
- Shop: Tire Chains
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Q&A: Is There A Cushioned Gen-Y Ball Mount Compatible With A Weight Distribution System?
- Shop: Westlake ST235/75R15 Radial Off-Road Trailer Tire - Load Range D
- Shop: Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop - 7K
- Article: How to Install Tire Chains
- Q&A: Timbren Suspension Enhancement for a 2011 Toyota FJ-Cruiser Trail Edition
- Video: Gen-Y Torsion Weight Distribution Shank Review
- Video: Review of Gen-Y Hitch Sway Control Plate - GY33YR
- Video: Review of Gen-Y Hitch Weight Distribution Hitch - GY54FR
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing
- Shop: Spacer Kit for Timbren Suspension Enhancement System
- Q&A: Why Won't Curt Rebellion XD Shock Absorbing Adjustable Ball Mount Work with Weight Distribution
- Q&A: Gen-Y Torsion Weight Distribution Shank For Towing a Trailer With a Lifted Truck
- Q&A: Which Axle Should Snow Chains Install on for a 4 Wheel Drive Vehicle
- Q&A: Gen-Y Glyder Shock Absorbing Ball Mount Multiple Trailer Connections
- Search Results: air bags
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer