Hitch Adapter for Bike Rack on 2017 Volkswagen Golf
Question:
Hello. I am considering a tow hitch c11412 for my 2017 VW Golf for a Kuat sherpa 2 bike carrier. The hitch is a class I, and I was going to purchase the Curt expander for a 1.25 to 2 inch but it states it is only for a class II hitch. I am not going to tow anything and was wondering why this expander would not work? Difference in pin positions? I understand this expander will reduce the tongue weight from 200 to 100 lbs, but the carrier and 2 bikes will be under that amount limit. Thanks.
asked by: Rick S
Expert Reply:
The Curt Trailer Hitch Receiver Adapter # C45785 does have different measurements than an adapter that is compatible with a Class I hitch, the Brophy # HTAD, as well as different capacities. For example, the Curt adapter is 6" from center of hitch pin hole to center of hitch pin hole while the Brophy is 7-1/4". The Curt is also rated for a tongue weight of 350 lbs while the Brophy is rated for 300 lbs. So the solution for you would be to use the appropriately rated Brophy # HTAD with Curt hitch # C11412. Please note that the adapter is going to require the use of 1/2" pin and clip # PC2 with a 1-1/4" receiver.
Something else you'll want to note is that the Curt hitch is going to require the use of stabilizing straps # 18050 with all non-trailer accessories such as bike racks and cargo carriers in order to maintain the warranty. I've added a link to a demonstration video which shows you how the straps are used.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Curt Trailer Hitch Receiver Adapter - 1-1/4" (Class II) to 2" - 6" Long
- Hitch Adapters
- Hitch Expander
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- 6 Inch Extension
- Fits 1-1/4 Inch Hitch
- 1-1/4 Inch to 2 Inch
- CURT
more information >
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
- Hitch Adapters
- Hitch Expander
- Bike Racks
- Cargo Carriers
- Hitch Mounted Accessories
- 7-1/4 Inch Extension
- Fits 1-1/4 Inch Hitch
- 1-1/4 Inch to 2 Inch
- Brophy
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Kuat Sherpa 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount - Gray
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Tilt-Away Rack
- Wheel Mount
- Bike and Hitch Lock
- 2 Bikes
- Class 1
- Class 2
- Fits 1-1/4 Inch Hitch
- Carbon Fiber Bikes
- Kuat
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is Trimming Required On The Draw-Tite Hitch For a 2019 Volkswagen Golf GTI
- Q&A: EcoHitch Stealth Trailer Hitch Receiver # 306-X7375 Tube & Bracket Size
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch for a 2019 Volkswagen Golf Highline
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Spare Tire Recommendation for a 2018 Aluma 548 Trailer
- Q&A: Best Trailer Hitch Receiver for 2019 Volkswagen Golf R
- Article: Trailer Wiring Diagrams
- Q&A: Completely Hidden Trailer Hitch for 2019 VW Golf GTI
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Hitch Installation Tips
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Wiring Installation Instructions for 2008 and Newer Volkswagen Rabbit and GTI