Installing an Electric Trailer Brake Controller in a Class A Motorhome with Air Brakes
Question:
2007 Revolution LE 40e Help me figure out how to tap into the trailer brake controller!!!!! PLEASE!!!
asked by: Eric
Expert Reply:
From my research your 2007 Fleetwood Revolution LE 40e motorhome has air brakes. However, you can still use an electric brake controller.
To install the controller, you'll need to wire it into your RV. The black wire connects to the positive post of the battery, the white to ground, the blue wire to the RV's trailer connector in the rear, and the red wire connects to the stop light switch. To find the correct stop light switch wire use a tester, like part # PTW2993, and find the circuit that only shows power when the brake pedal is pressed.
I've attached an article that you might find helpful as well.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Q&A: All Parts Needed to Flat Tow 2014 Chevy Silverado 1500 Behind Motorhome
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Recommended Flat Towing Parts for a 2024 GMC Canyon Denali
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150