How to Determine if 2016 Kia Sorento Has Factory Tow Prep Package

Question

Question:

How to Determine if 2016 Kia Sorento EX Has Factory Tow Prep Package

asked by: Mark W

0

Expert Reply:

The elements that comprise a factory tow package vary greatly from manufacturer to manufacturer and even between different model vehicles of the same manufacturer. Based on my research, it looks like the tow package for your 2016 Kia Sorento would simply feature a larger cooler and pre wiring for a trailer connector. To determine if your vehicle has the factory tow package, I recommend visiting your local Kia dealer with your VIN. They will then be able to tell you exactly what was installed at the factory.

If you are looking to tow a trailer, we have everything needed to set up your Sorento.

For a trailer hitch, I recommend the Draw-Tite Class III Max Frame Round Tube # 75908. This will provide a 5,000 pound towing capacity, although I also recommend checking the vehicle's capacity as listed in the owner's manual, as this will likely be the limiting factor. Unlike the Curt hitch that is also confirmed to fit your Sorento, Draw-Tite does not require the use of stabilizing straps # 18050 with non-trailer loads such as bike racks and cargo carriers.

To install a 4-Way connector needed to power the trailer's signal lights, I recommend the Curt T-Connector Wiring Harness # C56332 if the vehicle does in fact have the tow package. If you do not have the tow package, I instead recommend the Tekonsha T-One Wiring Harness # 118583. Both of these harnesses are simple installations that will plug directly into existing ports on the vehicle.

I have attached an article that will help you determine the size ball mount needed to tow your trailer level. I have also included a link that will take you to our available selection that you can look through.

expert reply by: Chris R

0

Answer 1

The Draw-Tite custom fit hitch part #75908 for the 2016 Kia Sorento max tongue weight capacity is up to 500 lbs. The tongue weight rating does not change if you weld the hitch to the vehicle's frame. The hitch may be rated up to 5,000 lbs…

view full answer...

Answer 2

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Answer 3

There is a panel just under and behind your driver's side wheel well that you can remove to determine if you have the tow package or not. If you check out the attached picture you can see what wiring will be in this location for the tow package…

view full answer...

Answer 4

Lets start with what you need to add to your 2016 Kia Sorento. I have two options for adding a 7-way to your vehicle. If you want a plug and play installation, we have the Tekonsha OEM Replacement Vehicle Wiring Harness #TK24FR. This would replace…

view full answer...

Answer 5

Yes, your 2019 Kia Sedona without the factory tow package is still compatible with the Tekonsha OEM Replacement Vehicle Wiring Harness with Brake Controller Adapter #TK24FR. According to the manufacturer, Tekonsha, this is compatible with all models…

view full answer...

Answer 6

If the 4-way kit you installed tied into the factory trailer wiring of the 2017 Kia Sorento then yes the 7-way kit part #TK24FR that you referenced would work as an easy upgrade to also install a brake controller. If the 4-way installed using the…

view full answer...

Answer 7

I do have an option for you but there isn't a plug and play seven way trailer connector option for a 2021 Kia Sorento without the factory tow package therefore no, the Tekonsha OEM Replacement Vehicle Wiring Harness with 7 Way Trailer Connector…

view full answer...

Answer 8

The exterior lights on your trailer - stop, turn and tail - and the interior lights will usually be fed by different power sources. On an RV-style 7-way the stop/turn light signals are carried on the pins at the 3-o-clock and 9-o-clock positions and…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The maximum towing capacity is determined by the lower of the weight capacities for your vehicle and the hitch that is installed on it. So if the weight capacity of your vehicle is lower, that will be the limiting factor. The towing capacity…

view full answer...

Answer 12

The first thing you will want to check is the owners manual for your 2015 Chevy Equinox. The manual contains the manufacturers recommendations and procedures for towing. Often times they recommend a break-in period on new vehicles before you can tow.…

view full answer...

How to Determine if 2016 Kia Sorento Has Factory Tow Prep Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching