Trailer Hitch Ball Mounts and Accessories
Ball Mounts
Videos
for Ball Mounts
Help Articles
for Ball Mounts
Expert Answers
for Ball Mounts
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…
view full answer...I recommend using the Curt Lock Set #C23556 for your Curt Adjustable 2-Ball Mount #C99NR. This comes with a lock for the hitch receiver and one for the ball mount platform. Even though your platform uses 2 pins, only 1 locking pin is needed to secure…
view full answer...Yes, they do. The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs item #F95FV will fit the dually and single rear models of the 2024 Ford F-350 4WD. These air bags have a 7,500 lbs capacity that will level out the rear end of your F-350…
view full answer...Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…
view full answer...Yes Tracy, the Curt Rockerball part #C40047 does fit the Curt aluminum ball mount part #C45293 that you referenced.
view full answer...There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
view full answer...The Dexter 2-Tang Clevis #T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches #MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount.…
view full answer...We several options with similar dimensions although none of them are an exact match to the Truck-Lite 60. The Peterson LumenX LED Trailer Tail Light #M822R-7 matches your length at 7-7/8" but is a little taller at 3-5/8" and has completely…
view full answer...There is indeed a B&W Tow & Stow ball mount that gives up up to 4-1/2 inches of drop and works with your GMC MultiPro tailgate; what you need is the following part number: - B&W Tow & Stow 2-Ball Mount - MultiPro - 2" Hitch -…
view full answer...You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…
view full answer...