How to Tell if a 2019 Kia Sorento has a Tow Package

Question

Question:

Wiring harnesseswhich one to orderhow do I tell if my 2019 Kia Sorento has factory tow package trailer wiring? Thanks.

asked by: Edwin W

1

Helpful Expert Reply:

There is a panel just under and behind your driver's side wheel well that you can remove to determine if you have the tow package or not.

If you check out the attached picture you can see what wiring will be in this location for the tow package once the panel is removed. If you have this wiring, then I recommend using the Curt T-Connector # C56332 but if you don't then I recommend the T-One # 118583.

I have also attached installation videos for each of these harnesses. The same panel is removed in each video so you can do a comparison if you would like.

expert reply by: Jon G

1

click to enlarge

Ray F.

2/6/2020

If fuse panel in motor compartment has 30 amp trailer fuse does that mean has the pre wired from factory for trailer hitch? 2019 Sorento v6 awd

Reply

Jason S.

2/7/2020

The fuse in your engine bay compartment may indicate that you have the factory tow package, but the only way to confirm is to look for the wiring harness located behind the rear bumper on the driver's side. I've attached a video of the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C56332 to show you this location so you can determine if your vehicle has the tow package or not.

Helpful Links

tv-install-trailer-wiring-2019-kia-sorento-c56332.aspx

Reply

Answer 1

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Answer 2

Absolutely, you can check just behind the rear tire on the driver's side of your 2019 Kia Sorento, on the outside of the frame rail. The factory connector, if present, will look like the one in the attached photo (B). Note that you will need…

view full answer...

Answer 3

The trailer hitch I recommend for a 2019 Kia Sorento LX is the etrailer Trailer Hitch Receiver part #e98843 which is a direct bolt-on fit with no cutting or drilling required. It has a class III rating with plenty capable 2" receiver tube…

view full answer...

Answer 4

For your 2019 Kia Sorento there are three roof rack options from Thule with that have unique advantages. The advantage of the square bar roof rack part numbers #TH712200, #TH710601, and #TH186033 compared to other options is price. It won't be as…

view full answer...

Answer 5

The simplest and most reliable way to determine if your 2017 Kia Sorento came with the tow package would be to contact a Kia dealer and give them your VIN and they'll be able to tell. Or if you still have the original window sticker it would be…

view full answer...

Answer 6

The trailer hitch I recommend for a 2018 Kia Sorento (All Models) is the etrailer Trailer Hitch Receiver part #e98843 which is a direct bolt-on fit which has a 5,000 lbs weight capacity. I really like the etrailer hitch over the Curt and Draw-Tite…

view full answer...

Answer 7

The engine itself doesn't quite make the difference, but the model does. If you have the SX model of the 2019 Kia Sorento I recommend the Class III etrailer.com Trailer Hitch #e98843 because it has a matte black finish that does a great job of…

view full answer...

Answer 8

We have exactly what you're looking for with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package #CU94FR. This plugs into the OEM connector on your 2020 Hyundai Santa Fe and gives you a 4-Way flat connector that then supplies your…

view full answer...

Answer 9

The elements that comprise a factory tow package vary greatly from manufacturer to manufacturer and even between different model vehicles of the same manufacturer. Based on my research, it looks like the tow package for your 2016 Kia Sorento would…

view full answer...

Answer 10

The etrailer Trailer Hitch Receiver #e28AR is confirmed to fit your 2022 Kia Sorento SX Prestige AWD. The trailer hitch has a bolt-on installation - with no welding required. It has a matte black powder coat finish which is over a protective base…

view full answer...

Answer 11

I recommend the etrailer Trailer Hitch Receiver #e28AR for your 2022 Kia Sorento X-Line AWD. This receiver is confirmed to fit all trim levels of your 2022 Kia Sorento. The spare tire can be retained in its original location with this receiver. The…

view full answer...

Answer 12

The tongue weight capacity of your 2018 Kia Sorento will vary depending on engine size. If you have the 2.4L I4 engine then your maximum tongue weight capacity is 280 lbs but if you have the 3.3L V6 engine then your maximum tongue weight capacity is…

view full answer...

How to Tell if a 2019 Kia Sorento has a Tow Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching