How to Pick Out Rise Ball Mount for 2017 Nissan Pathfinder Hitch
Question:
I will be pulling our 18ft ProV on a karavan 3200 trailer and believe I need about a 4inch riser. I pulled the boat without a riser and had nothing but problems. Chains dragging, trailer lights dragging the ground and coming unplugged. It was way too low. I have a 2 inch receiver on my vehicle and need to know which rising hitch would be best.
asked by: Nikki V
Expert Reply:
I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom of the trailer coupler when the trailer is on level ground.
Next, you will need to compute the difference. If the hitch height is greater than the coupler height the difference is the drop required. If the coupler height is greater the difference is the rise required. You will want to pick the ball mount with the rise/drop closest to the difference.
For a ball mount with a 4 inch rise we have the part # C45070 which would work well. For a 2 inch ball we have the # 63845 and then for a 2-5/16 inch ball we have the part # 63847.
Products Referenced in This Question
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 9-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Shop: Curt RockerBall Shock Absorbing 2" Hitch Ball - 1" Diameter Shank - Chrome - 7.5K
- Q&A: How Tall is Curt Rockerball # C40047 Above Ball Mount Platform
- Video: Shocker Hitch Ball Mounts Manufacturer Discussion
- Shop: Curt Ball Mount for 2" Hitches - 2-1/4" Rise, 3-1/2" Drop - 7,500 lbs - Chrome
- Video: Curt Trailer Hitch Ball Mount Review C45070
- Video: Lets Go Aero Anti-Rattle Hitch Pin Review
- Video: Malone Anti-Rattle HitchLock System Review
- Video: Review of Gen-Y Hitch Hitch Anti-Rattle - Anti-Rattle Clamp 2 Inch Hitch Receiver - GY88XR
- Video: Roadmaster Quiet Hitch Review
- Video: Review of Lets Go Aero Hitch Anti-Rattle - Standard Anti-Rattle - SHP2061
- Shop: Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs - Chrome Plated
- Shop: Roadmaster Quiet Hitch for 2" Trailer Hitches
- Shop: Brophy Stabilizer Bracket for 2" Hitch Receiver - Black Powder Coated Steel
- Q&A: Shock Absorbing Hitch Ball Mount Compatibility
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Q&A: How Can I Tell if My 2013 Nissan Pathfinder Came With Factory Tow Package
- Search Results: hitch pin
- Search Results: trailer hitch receiver
- Search Results: 2 trailer hitch receiver
- Search Results: trailer hitch
- Article: Trailer Hitch Installation Tips
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Correct Tekonsha T-One Wiring Harness Needed For 2022 Nissan Pathfinder Without Factory Tow Package
- Q&A: Does a Trailer have to be towed Level or Can it be Off Up or Down
- Q&A: How To Add a 7-Way Trailer Connector to a 2022 Nissan Pathfinder
- Search Results: 118850