How To Attach A Ground Wire To Trailer Frame
Question:
Is there anything that will secure the ground wire to the metal on a trailer to ensure the ground wire will stay in contact with the trailer? Or is it best to just drill a hole in the metal and secure the ground wire by placing a screw through the metal rim on the end of it?
asked by: Candy W
Expert Reply:
The best way to secure a ground to a trailer or any metal surface is to do exactly what you described.
You will want to make sure you have a ring terminal like part # DW05702-1 attached to the ground wire first. Then drill a hole in the surface you want to attach the ground to. Make sure the surface is clean and free of any solvents, grease, or dirt and securely fasten the ring terminal with a sheet metal screw.
Products Referenced in This Question
Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1
- Wiring
- Wire Connectors
- Ring Terminals
- 1/4 Inch Diameter
- 16-14 Gauge
- Deka
more information >
Product Page this Question was Asked From
LED Clearance or Side Marker Light w/ Reflector - Submersible - 4 Diode - Rectangle - Red Lens
- Trailer Lights
- Clearance Lights
- Rear Clearance
- Side Marker
- Rectangle
- Surface Mount
- Submersible Lights
- LED Light
- 6L x 2W Inch
- Red
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Shop: Tandem Axle Trailer Fenders - Rounded Edges - Steel - 14" to 15" Wheels - Qty 2
- Article: How to Bleed Your Trailer Surge Brakes
- Shop: Brake Controller
- Shop: Ring Terminal -16-14 Gauge - 1/4" Ring ID - Qty. 1
- Shop: Tandem Axle Trailer Fender - Bolt Together - Steel - 14" to 15" Wheels - Qty 1
- Shop: Tandem Axle Trailer Fender - Bolt Together - Steel - 14" to 15" Wheels - Qty 1
- Video: Review of etrailer Trailer Fenders - Tandem Axle Bolt Together Steel Fender - HP97VR
- Shop: Karrier ST225/75R15 Radial Trailer Tire with 15" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Search Results: 5 on 4~1/2
- Shop: Dexter DX7.5L A-60 Brake Actuator - Weld On - Drum - 2" Ball - Primed - 7,500 lbs
- Shop: Trailer Hitch
- Shop: Jacketed 2 Wire (Brake Wire) - 12 Gauge - per Foot
- Q&A: Preferred Method of Grounding Trailer Lighting Circuits
- Search Results: license light
- Search Results: 2047
- Video: This Old Trailer: Troubleshooting the Ground Wire
- Video: Bleeding Brakes Demonstration
- Q&A: Can I Put Larger Wheels and Tires On My Harbor Freight Trailer By Replacing the Hubs?
- Q&A: Upgrading Trailer Tires and Wheels For Highway use on Harbor Freight 4x8 Folding Trailer
- Q&A: Troubleshooting Grounding Issue on Aluminum Trailer
- Q&A: What are the Functions of Trailer Light Green, Yellow, and Brown Wires
- Q&A: Will Bearing Buddy Grease Caps Fit a Harbor Freight Trailer 62671 Folding Trailer?
- Q&A: Upgrading the Tire and Wheel on a Harbor Freight Trailer
- Video: Demco Straight Tongue Trailer Coupler - Standard Coupler - DM12717 Review
- Video: Review of Peterson Trailer Lights - Interior Lights - 359-3
- Video: Review of Optronics RV Lighting - Interior Light - RVILL50
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Search Results: dh38r