Trailer Running Lights Keep Blowing Fuses when Turned On
Question:
Have a homesteader enclosed cargo trailer. All of a sudden when I turn on running lights they dim and immediately blow the fuse.Brake and turn signals and brakes are working fine?What should I do?
asked by: Todd L
Expert Reply:
It sounds like there is a short circuit that is overloading the running light circuit in the tow package wiring on your tow vehicle. The most likely culprit is a dirty or corroded trailer connector on the vehicle or trailer if not both.
The first thing I recommend is to make sure the truck and trailer side connectors are clean and free of corrosion inside, where the wires attach, and outside on the pins. You can also check for any damaged or pinched wires on the truck and on the trailer and repair as needed.
If a wire going to any of the running lights is exposed and touching metal it will cause a short that could blow the fuse.
The other possibility is that if you added any lights to the trailer that use the running light circuit the extra power draw could be too much for the tow package wiring. The fix for this is to switch to LED lights because they draw a fraction of the power of incandescent lights. I have included a link to the LED trailer lights we carry.
Product Page this Question was Asked From
Pollak Replacement 7-Pole, RV-Style Trailer Connector Socket - Vehicle End
- Trailer Wiring
- Trailer Connectors
- Vehicle End Connector
- Plug Only
- 7 Round - Blade
- Pollak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM8759802
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Shop: Demco Hydraulic Brake Actuator - Drum - Primed - A-Frame - 2-5/16" Bulldog Coupler - 8,000 lbs
- Shop: Demco Hydraulic Brake Actuator - Drum - Primed - 8" Adjustable Channel Center - 12,500 lbs
- Video: Review of Demco Brake Actuator - Surge Brake Actuator - DM8101222
- Shop: Durabilt Ratchet Chain Binder Set w/ Removable Handle for 5/16" to 3/8" Chain - 7,300 lbs
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Running Light Fuse Keeps Blowing Even with Trailer Running Lights Disconnected
- Shop: Vesper Steel Modular Trailer Wheel - 16" x 6" Rim - 8 on 6-1/2 - Silver
- Shop: Trimax Stainless Steel Padlocks with 3/8" Shielded Shackle - Qty 3
- Shop: Trailer Hitch
- Q&A: 12 inch Hydraulic Drum Brake Assembly that Activates in Forward and Reverse
- Video: etrailer Trailer Brakes AKUBRK-7R Review
- Shop: Demco Hydraulic Brake Actuator - Drum - Primed - A-Frame - Adjustable Channel Down - 12,500 lbs
- Shop: Durabilt Transport Chain with Grab Hook - 3/8" Chain - 6' Long - 6,600 lbs
- Shop: Brake Controller
- Video: Optronics Submersible LED Trailer Combination Tail Light Review and Installation
- Video: Optronics ONE LED Trailer Tail Light Review
- Search Results: k23~528~00
- Search Results: lpl~31cb
- Search Results: 12~706
- Shop: Vehicle Tow Bar Wiring
- Q&A: Troubleshooting Blown Vehicle Fuses Every Time Trailer is Connected
- Search Results: wheel stud
- Video: Review of Durabilt Chain Binders - Ratchet Chain Binder Set With Removable Handle - DU97GR
- Search Results: cmc~007
- Search Results: ufp
- Search Results: tjb2001b
on Trailer Wiring
