Curt Winch Mount Plate Recommendation for Superwinch Tiger Shark Winch

Question

Question:

Will the Tiger Shark 11500 SW1511200 fit on the Curt Trailer Hitch Electric Winch Mount Plate C31010? I saw the mount is only rated for 9000. That is fine for me, I would like the heavier 11500 winch if it will fit. Thanks.

asked by: Dan L

0

Expert Reply:

Yes, the Superwinch Tiger Shark Series Off-Road Winch # SW1511200 that you referenced will fit the Curt Winch Mount part # C31010 that you also referenced. The winch has more capacity than the mount so you would have to stay under the 9k rating of the mount.

The Curt mount is designed to fit the standard mounting bolt pattern of winches like this Superwinch.

expert reply by: Jameson C

0

Answer 1

The picture for determining bolt pattern is actually a little easier than maybe it seems. You just need to measure across the wheel like it shows and then count the amount of lug holes and that's all you need. So if it's 5 inches and its a 5…

view full answer...

Answer 2

We can help you select the right electric winch for your car trailer that will be able to handle the vehicle's 3500-lb weight and the slope of your trailer's loading ramp. For reference I linked an article that has great helpful information…

view full answer...

Answer 3

I do have an option for you but there isn't any receiver mount options for the Superwinch Winch 2 Go Portable part #SW1140232 since it's designed to be portable and it's a little underrated for full-size trucks. Instead, I recommend the…

view full answer...

Answer 4

For the Curt winch mount, #C31010, or any of the similar mounts, you will need to compare the mounting pattern on the mount to what your winch requires. I have included 2 pictures. One shows the mount pattern of the Curt mount.

view full answer...

Answer 5

For a shut off switch with the Bulldog Winch part #BDW10030 I'd recommend the switch part #BDW20248 which is rated for 500 amps and is very easy to use. This is a cheap insurance policy for your winch wiring so it would be a really great…

view full answer...

Answer 6

Yes, the Warn M8000 Winch uses a 10" x 4-1/2" mounting pattern which the Curt Trailer Hitch Electric Winch Mount Plate part #C31010 will accept so they can be used together just fine. The 10" x 4-1/2" mounting pattern is an…

view full answer...

Answer 7

For mounting a winch to a trailer like the Superwinch #SW1455201 one solution is to weld a hitch tube to the trailer like with the part #E-9 so that you could use a winch mounting plate like the #BDW20011 and have a way to easily remove and reinstall…

view full answer...

Answer 8

The Bulldog Winch part #BDW15020 would be a great option for your setup. This is a 4,400 lb 12 volt winch which uses a synthetic rope instead of a steel cable. It powers in and out and has a built in brake as well. The winch also moves at 19 feet per…

view full answer...

Answer 9

I can understand why this might be confusing, when it comes to the different ratings. Rolling capacity is essentially just the capacity of the winch to pull a load that is moving up an incline; technically the capacity that is listed is the maximum…

view full answer...

Answer 10

Typically, we want a winch that will be used to load a car trailer to have a line pull capacity at least 50% greater than its. gross vehicle weight With that in mind, my recommendation is the Bulldog Winch Trailer Winch - Synthetic Rope - Hawse…

view full answer...

Answer 11

Troubleshooting electric trailer brakes is much easier if you disconnect the trailer plug from the truck and test each side separately. The process is not complicated and you need only a few items. I suggest starting on the trailer. You'll just…

view full answer...

Answer 12

I have a selection of front mount hitch mounting plates to choose from. I am including a link to a product page that will list the choices of mounting plates. Our most popular mounting plates for front mount hitch is the CURT Trailer Hitch Electric…

view full answer...

Curt Winch Mount Plate Recommendation for Superwinch Tiger Shark Winch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching