Recommended Trailer Hitch for 2007 Jeep Grand Cherokee Laredo for Towing Fishing Cart
Question:
I have a 2007 Jeep Larado I want to put a hitch on the back for a fishing cart witch one do you recomened that I use with out any drilling needed. Thank You.
asked by: Sal D
Expert Reply:
The most popular hitch receiver for your 2007 Jeep Grand Cherokee Laredo is the 2-inch Class III hitch # 13251 from Curt. This installs without drilling, as do all other available hitches that you can see on the linked page. This hitch fits all GC models expect the SRT-8.
This 2-inch Cass III hitch gives you a higher capacity than smaller 1-1/4-inch types but also costs less than other Class III hitches. All required mounting hardware is included and an installation video is linked as well.
Towing will also require a ball mount, hitch ball and pin and clip. Curt recommends ball mount # C45030 but if you need one with more rise or drop you can refer to the linked article for help in choosing the right one to keep your trailer level when it is hitched. For a hitch ball you can use either 2-inch ball # 63845 or 2-5/16-inch ball # 63847 depending on which size matches your trailer's coupler. The size of ball required should be stamped into the coupler or appear on a sticker.
For a simple pin and clip use # C21500 or locking pin # e98880.
If your fishing cart has lights you'll need a wiring harness to power them. You can use the plug-and-play harness # 118425 from Tow Ready that simply plugs in at the GC's taillights. An install video is linked for you.
I also included a helpful article on towing basics that might be worth a read.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
Curt Ball Mount for 2" Hitches - 1" Rise, 2-1/4" Drop - 7-5/8" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 5500 lbs WD GTW
- 2 Inch Hitch
- 550 lbs WD TW
- No Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Video: Trailer Wiring Harness Installation - 2007 Jeep Grand Cherokee
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Best 2007 Jeep Grand Cherokee Trailer Wiring Options
- Video: Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM11142555 Review
- Video: EcoHitch Eclipse 4-Way Flat Trailer Connector Magnetic Mounting Bracket Review
- Video: Review of Bauer Products 4-Way Trailer Plug Mount - BA69VR
- Video: Brophy Mounting Bracket for 4-Pole Flat Trailer Connector Review
- Shop: Replacement Mounting Bracket for Hopkins 7- and 4-Pole Trailer Connector Socket
- Shop: Brophy Mounting Bracket for 4-Pole Flat Trailer Connector
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Shop: Hopkins Fold-Over Mounting Bracket for 4-Way Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: 44649
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Search Results: 25580
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Article: My Trailer Hitch Doesn't Fit
- Shop: Fifth Wheel Hitch
- Search Results: dust cap