How To Add Surge Brakes to a Small Trailer Towed by Harley Motorcycle

Question

Question:

I would like to install breaks on the Kuickamp trailer I tow with my Harley, It weighs around 500 lbs. loaded and hard to stop. It has 10in wheels. I believe something about golf cart size would work, also would like the surge type. 12in wheels will fit. Can u help. thanks much. also we have 3 units.

asked by: Dave M

0

Expert Reply:

We have a help article that I attached that details exactly everything you will need to do to install surge brakes on your trailer. Check it out.

expert reply by: Jameson C

0

Answer 1

I would be happy to help you put together the components you need to build your own trailer and do my best to keep the weight down. You are off to a good start with the Timbren Axle-Less Trailer Suspension System - Spindle w/Brake Flange item…

view full answer...

Answer 2

I contacted the manufacturer about if there was a left-hand version of the Bauer Products European Style RV Entry Lock #BA58AR. They informed me that there is not a specific left hand version available but they said that the #BA58AR can be used for…

view full answer...

Answer 3

We do have replacement RV Entry Door Handles like the Global Link #295-000019 as well as deadbolts like the Valterra #L32CS3108 with 1" throw, but these are keyed separately as we don't have an all-in-one kit with both locks keyed. Alike.…

view full answer...

Answer 4

You will want to select the grommet around the steering column and feed through that. The correct Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter for a 2021 Toyota Highlander is #TK57VR. Please note the linked installation…

view full answer...

Answer 5

The Mach 3 does seem to have some tough reviews when it comes to noise level. The Furrion #FR52PR and Advent Air #ACM135C options we currently offer both sit around 76-80 decibels when the fan is on high. This roughly compares to the sound of a…

view full answer...

Answer 6

I can tell you how to determine that, but there isn't a specific fit for any trailer, including your Big Tex, for the Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs #HAP-158-258-03. Since you have 10,000 lb Dexter axles,…

view full answer...

Answer 7

For your 2018 Ford F-150 I really like the Edge Gas Evolution CTS3 Performance Tuner #EP59YR. This tuner will plug right into the OBD-II port on your truck so that you can re-program the ECM for increased power and fuel economy. A really nice part…

view full answer...

Answer 8

I just spoke with my rep at Advent and the Advent Air Replacement RV Air Conditioner for Dometic Setup w/ Start Capacitor item #ACDOM135 has a decibel level of 76. I wasn't able to find a decibel level for the Coleman Mach 8 but was told that the…

view full answer...

Answer 9

For an RV with a currently installed Dometic Duo-Therm 59516.531 AC unit, I recommend the Advent Air for Dometic Setups, #ACDOM150. This is a 15,000 Btu replacement option that plugs directly into your current Dometic setup and works seamlessly with…

view full answer...

Answer 10

To install the Draw-Tite Max-Frame Trailer Hitch Receiver #DT55MR on your 2021 Toyota Sienna you will need to trim a portion of the underbody panel on the drivers side of the Sienna. I have included a picture of the area that will be trimmed out from…

view full answer...

Answer 11

Essentially the #LG-196308 and the #LC196308 are identical. I'd go with the lower priced of the two since neither is a better choice than the other.

view full answer...

How To Add Surge Brakes to a Small Trailer Towed by Harley Motorcycle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching