How to Determine if Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2 Slipper Springs Will Work

Question:

I had a chance to measure the springs and they are 3” wide. Do you have a kit that will work?

asked by: Gerald A

Expert Reply:

I can tell you how to determine that, but there isn't a specific fit for any trailer, including your Big Tex, for the Dexter Tandem-Axle Trailer Hanger Kit for 2-1/2" Slipper Springs # HAP-158-258-03.

Since you have 10,000 lb Dexter axles, you're set there, and you likely have 2-1/2 inch slipper springs (though you may want to measure their width just to be sure), so all you have to do is measure you axle spacing. To do this, simply measure from the center of one axle to the center of your other axle.

If that measurement is 48-1/2 inches you can use the Dexter Tandem-Axle Trailer Hanger Kit # HAP-158-258-03.

expert reply by: Kyle S

Jerry A.

8/15/2022

I had a chance to measure the springs and they are 3” wide. Do you have a kit that will work?

Kyle S.

8/15/2022

Thanks for that info and yes, we do have 3" wide slipper spring kits, and here are your options, depending on your axle spacing: - 38" Axle Spacing: Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs # HAP-103-203-01 - 42-1/4" Axle Spacing: Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs # HAP-103-203-02 - 48-1/2" Axle Spacing: Dexter Tandem-Axle Trailer Hanger Kit for 3" Slipper Springs # HAP-103-203-03