bing tracking image
  1. Trailer Lights
  2. Optronics
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red
Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side

Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side

Item # RVSTLB60
Our Price: $41.24
Trailer Lights
Shipping Weight: 0.55 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 3 functions: brake, tail, and turn light. Snap-on lens. Mounts of surface of trailer. 3-Wire pigtail. Great Prices for the best trailer lights from Optronics. Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side part number RVSTLB60 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (142)
  • Q & A (0)
  • Photos

Optronics Trailer Lights - RVSTLB60

  • Tail Lights
  • Rectangle
  • LED Light
  • Red
  • 8-11/16L x 3-3/16W Inch
  • Surface Mount
  • Rear Reflector
  • Stop/Turn/Tail
  • Non-Submersible Lights
  • Optronics

8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 3 functions: brake, tail, and turn light. Snap-on lens. Mounts of surface of trailer. 3-Wire pigtail.


Features:

  • Low-profile RV tail light serves 3 functions
    • Stop, turn, and tail light
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Durable black ABS plastic base and snap-on lens
  • Red lens over white LEDs
  • Compatible with 12V DC systems
  • Mounts on surface of trailer - hardware not included
  • 3-Wire pigtail
    • White wire for ground
    • Black wire for tail light
    • Green wire for stop/turn signal light
  • DOT compliant
    • Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting


Specs:

  • Configuration: passenger side
    • Driver side: RVSTLB61 (sold separately)
  • Light dimensions: 8-11/16" long x 3-3/16" tall x 2-1/8" deep
  • Diodes: 9
  • Power draw at 12.8V:
    • Stop/turn: 0.243 amps
    • Tail: 0.046 amps
  • Lifetime warranty on LEDs


Optronics RVSTL60 Series RV combination tail light Dimensions

RVSTLB60 Optronics Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Red Lens - Passenger Side - Right Hand




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side - RVSTLB60

Average Customer Rating:  4.8 out of 5 stars   (142 Customer Reviews)

8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 3 functions: brake, tail, and turn light. Snap-on lens. Mounts of surface of trailer. 3-Wire pigtail.

by:

Well built, easy installation. Nice LED upgrade to my trailer



by:

Installed about 1 year ago, still working fine. These were an exact match replacement for my older taillights. I like the LED and no longer need to replace bulbs.



by:

Easy replacement.



by:

so far, working great

Lee

1/12/2024

Still working great



by:

Fast service. I called to get more information on which taillight to order and customer service answered my phone call right away and answered my question! I have used etrailer before for parts and will continue using them.



by:

The L.E.D. taillights were delivered quickly and work perfectly.



by:

Service was great Product info was accurate. Thank you for your quick response.



by:

Much brighter and easier to see than standard bulb lights. Direct replacement for my original taillights.



by:

The lights were very easy to install, and the LED lights were exactly what I was looking for to provide the bright light.



by:

Look just like my original incandescent lights, but brighter. Very easy install. Just be gentle snapping the lenses on.



by:

They work very well.



by:

Its a great tail light with the exception of the locking tabs to keep the lens attached are weak. Due to these weak tabs I have used a adhesive tape around the perimeter of the lens seal to assure the lens doesn't fall off



by:

I bought these LED taillights to replace a set of incandecent style taillights that were having issues. My 2017 Wildcat was almost entirely running LED style lights both inside and out except for the taillights, so I decided to install LED taillights rather than troubleshoot these original taillights. I did find a problem with the way that the factory had wired my taillights during the process. The factory had the brake/turning signal wiring and taillight wiring reversed, which was not noticable with the incandescent style lights, but was very apparent with the newer LED lights. Once wired correctly these LED taillights really out shine the original taillights and I'm very happy with them in general and would buy them again.

James H.

4/26/2020

These tail lights are still working well after a year. My only complaint is I wish they were as big as the ones I removed. The new ones are shorter then my old lights, so two of the older screw holes are now visible. I sealed them with clear RTV sealant, but I still see them. I couldnt find any LED style taillights as big as my older ones.



by:

I replaced all the clearance lights and taillights on our fifth wheel camper with these OE style LED versions. They are much brighter and therefore much safer, especially in the case of the tail/brake/turn lights seen elsewhere at etrailer. They should last a lot longer than the original bulb units. I also like the way they look as compared to the old bulb style. Our camper was only a year old, and I don't understand why they all wouldn't come from the factory with LEDs. I installed them all myself without issue.

Grant N.

1/22/2018

Thank you for your follow up. I am still happy with my purchase,although they are installed on a fifth wheel camper trailer that doesnt getused a lot and usually in the daylight hours, so the lights havent got alot of hours on them. So far, so good. Thanks again.



by:

Ordered a hitch pin and 2 led tail light assemblies. Came in one box Christmas eve, sst hitch pin had 2 layers of padding but the 2 tail lights were loose in the box with no wrapping or packaging. One lens has a chunk broken off and other has a gash across the lens.

Have requested replacements but probably wont hear back until after holidays. Very surprised the tail lights were loose with no label or mounting screws or instructions or blister pack.



by:

The original incandescent bulbs on my 16ft KZ Sportsmen weren't very bright in the South Florida Sun. The new lights were a great match in terms of size, the installation instructions were clear and daytime visibility of turning and braking has greatly improved. No problems with leaking or fading one year after.

Rich F.

8/5/2022

Two years later the lights are still functioning properly. No dimming, fading, cracking or leaks despite being stored outside in the South Florida sun.



by:

I purchased these LED taillights as a direct replacement for the stock incandescent fixtures that our 2019 Aliner Ranger 12 came with. I wanted to upgrade to LED for greater visibility and reliability. These were a win on both counts. The best part was that I didn't have to drill any new holes to mount them as the fixture housings are identical.

Keith I.

6/2/2021

The lights are still working great! Very happy.



by:

Easy installation & matches original pr oduct.

Charles

12/9/2022

Product performing like it did when new.



by:

Product worked perfectly. Much brighter than original bulb type, and super easy to install. Don't forget that your trailer wire coloring, and standard wire coloring are not the same. Pay attention to original wiring before you cut replace old light kit.

Brendan

8/6/2021

Still bright and working perfectly. I would suggest to anyone with a new or old rig to update to the LED version.



by:

Very satisfied with this LED for the passenger's side of my 5th wheel. Looks way more finished than original lights were and much much brighter!!!! Thank you again!

Bob S.

10/1/2018

Perfect still. Very happy with these products, thanks again!!



by:

I had a wanted to install a quick and easy LED system for my existing fifth wheel halogen taillights. It was a pretty simple task and we love them!

Ron

7/22/2021

Awesome, much better to see than the OEM halogen lights.



by:

It arrived on time without any damage. It was a direct replacement that was completed without any problems. I would buy again.



by:

Oh baby, what a huge improvement and upgrade from our original factory 2018 Grand Design Reflection 5th wheel brake & tail lights. These new LED lights are brighter, safer and add a large measure of confidence when I am towing. The swap out project was easy & I used the heat shrink wire connectors for added connection strength & waterproofing. I really think RV manufacturers should all move to the LED lights. They really do make a big difference! Also, check out the LED RV marker lights that etrailer sells. They are a good investment. We are glade we did these LED light upgrades when we did, even though our RV is fairly new. Big safety advantage.



by:

Quick delivery



by:

Wow! 1st experience and it was great! Exactly what I needed and arrived sooner than expected!


25
142
Show More Reviews

See what our Experts say about this Optronics Trailer Lights

  • Driver And Passenger Side Low Profile LED RV Tail Light
    I can help you out here as we do have both the driver side and passenger Low Profile LED RV Tail Light. The matching passenger side has 9 diodes though because it does not have bulbs to light up the license plate. The two matching lights are the following: - Driver Side: Low Profile LED RV Tail Light with License Bracket # RVSTLB61 - Passenger Side: Low Profile LED RV Tail Light # RVSTLB60
    view full answer...
  • Replacement Tail Light Options for 2016 Coleman Lantern Travel Trailer
    It sounds like you are looking for a replacement passenger side tail light for your 2016 Coleman Lantern 274bh trailer by Dutchmen. If that is the case, we have exactly what you are looking for! From my research, it looks like those trailers came with incandescent lights, but could've been upgraded to LED, so I'll give you both options. For an incandescent light, you will want part # RVSTB60. For an LED light, you will want part # RVSTLB60 We also have the drivers side lights if you'd...
    view full answer...
  • Replacement Taillight for Fifth Wheel that Has Raised Center Section
    Hit reply to this with the picture and I'll take a look and see if we have it.
    view full answer...
    Image 1 for
  • Replacement Taillights for 2000 Jayco Eagle Camper
    I do have an option for you but the wraparound style taillights on a 2000 Jayco Eagle Camper are no longer available therefore your only options for replacement are changing to a different style like the Low Profile LED RV Tail Light part # RVSTLB60 for passenger or part # RVSTLB61 for driver which is what I recommend. These lights are LEDs so they will burn brighter and pull less power than the old incandescent. Unfortunately, you'll need to modify the mounting and wiring to make them...
    view full answer...
    Image 1 for
  • Solution for Needing Replacement Lens for Trailer Taillight SAE AISTO1
    Since the lens you'd need part number AST50B is no longer available you'd need an all new assembly which for that the best option is the part # RVST50 since you'd basically only be using it for just the lens as this is the most cost effective solution we have.
    view full answer...
  • Replacement Taillight Base for 2015 Coachmen Freedom Express
    The brackets are part of the taillight assembly and only available as an assembly. For the Passenger Side Taillight # RVSTLB60 will be the taillight assembly. I do ask that you confirm the dimensions of the base as 8-5/8" x 3-3/16" rectangle. If that is correct the Driver Side Taillight is # RVSTLB61. If your lights are a different size, let me know and I will help you find the correct size.
    view full answer...
  • Optronics Low Profile LED RV Tail Light Wire Gauge
    The Low Profile LED RV Tail Light # RVSTLB60 uses 20 gauge wire.
    view full answer...
  • Similar LED Version of Peterson Trailer Taillight # V457
    The closest LED trailer taillight to # V457 is the Optronics part # RVSTLB61 which has a license plate bracket or the part number # RVSTLB60 which does not.
    view full answer...
  • Recommended LED Trailer Lights To Replace Incandescent Lights
    If you are wanting to go from incandescent lights to LED lights, I recommend the Optronics Low Profile Combination Light like part # RVSTLB61 for the driver side and part # RVSTLB60 for the passenger side. These lights have similar but not exact measurements as the Bargman lights, part # 30-92-003 you said you have. The Optronics lights measure 8-11/16 inches long, 3-3/16 inches tall and 2-1/8 inches deep. They are about 1/4 inch longer and about an inch more narrow than the Bargman lights....
    view full answer...
  • Should I Replace My RV Tail Light?
    Definitely just replace them, simply because the product will start rusting and next you may have electrical issues in the future. The RV Tail Light # 30-92-003 have a 1-Year warranty. Or if you would like a LED upgrade I recommend # RVSTLB61 and # RVSTLB60. Or the white base version # RVSTL61 and # RVSTL60.
    view full answer...
  • Replacement Tail Light Recommendation for 2016 Evergreen I-GO with Command Electronics 003-81 Lights
    For an exact LED replacement from Command Electronics you need the following: - Driver Side # 328-003-81LBM1 - Passenger Side # 328-003-81BM1 These measure 8-11/16" long x 3-7/8" tall x 2" deep and have mounting holes measuring 7-3/16" x 2-9/16" apart (see attached). If you're wanting something more cost-effective then we do have an option from Optronics (see below) but the mounting holes are a little different (7-3/8" x 1-7/8") so you'll be drilling new holes to get it mounted: ...
    view full answer...
    Image 1 for
  • Is Resistor Needed to Install Low Profile RV Tail Light RVSTLB60 and Prevent Hyperflashing
    The part # RVSTLB60 does not have resistors built into it so you would need to provide them if you wanted to prevent hyperflashing. For that we have the # DI34ZR which is a pair of them.
    view full answer...
  • Replacement Lens For A 2019 Forest River Salem Cruise Lite Travel Trailer
    That looks an awful lot like the Optronics LED # RVSTLB61 and # RVSTLB60. I am not able to see a specific model number in your picture but it looks extremely similar. We do carry replacement lenses for these # AST61B. It is the same lens for the driver and passenger side. The light itself measures 8-11/16" long x 3-3/16" wide x 2-1/8" deep. If you can measure the existing light that will really help us connect the dots.
    view full answer...
    Image 1 for Image 2 for
  • Do SAE Numbers Indicate Tail Light Lens Replacement for RVSTLB60
    That's a good question but the SAE number on a light just stands for "Society of Automotive Engineers" and isn't indicative of the exact part. It just means that it has passed their guidelines. The correct replacement lens for the Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes - Black Base - Passenger Side # RVSTLB60 is Replacement Lens # AST60B. Replacement lenses are specific to the light so if you aren't sure what you have you may want to replace the light altogether,...
    view full answer...
  • Replacement Lens for Optronics Tail Light RVSTLB60
    Yes you can purchase the lens by itself of the Low Profile LED RV Tail Light - Stop, Tail, Turn - Black Base - Passenger Side # RVSTLB60. The part you need is the Replacement Lens # AST60B.
    view full answer...
  • Replacement Tail Lights for Older Jayco Eagle Pop-Up Camper
    I do have an option for you but the factory tail lights on an older Jayco Eagle Pop-Up wraparound to the outside of the trailer and none of the aftermarket replacement will have this feature. That said, you could pretty easily replace them with some surface mount lights like the Low Profile LED RV Tail Light part # RVSTLB61 for driver and part # RVSTLB60 for passenger. It should be pretty easy to make the swap, you will likely need to drill new holes to secure the light and open up the...
    view full answer...
  • What Is Difference In Wiring For Replacement Lights On Trailer
    The wiring on any lights you put on your trailer depends on the functions you are using the lights for. It sounds like you are wanting to replace the clearance or marker lights on your trailer. If you have one wire, it will be attached to the running light wiring and the light will be grounded through the mounting hardware. If you have 2 wires, it will typically be attached to the running light circuit and the second wire will be a ground. and attached to any clean bare metal surface....
    view full answer...
  • Replacement Tongue Jack Switch and Tail Lights For 2020 East to West Della Terra Travel Trailer
    It could be the Switch # EJ-3520-PSW on your Electric Jack # EJ-3520-BBX that will no longer allow the jack to go up. I recommend checking the wiring going into the switch to determine if any of the wires are loose or you have any broken contacts. We have the Low Profile LED RV Tail Light w/ License Bracket # RVSTLB61 for your 2020 East to West Della Terra travel trailer. This is the replacement for the drivers side based on the images I was able to find for your trailer. We also have...
    view full answer...
  • LED Trailer Tail Lights with a Black Base
    For a black base you can use # RVSTLB60 for the right side of the trailer. For the left side of the trailer use # RVSTLB61.
    view full answer...
  • Comparison Of RVSTLB0060 And RVSTLB60 Trailer Lights
    There are only a couple differences between the # RVSTLB60 and # RVSTLB0060 trailer lights. The # RVSTLB0060 features a ONE Series LED light which is brighter than traditional LED lights. The light measures 8-5/8 inches long. The # RVSTLB60 has 9 LED lights and it measures 6-11/16 inches long. Both lights measure 3-3/16 inches wide and 2-1/4 inches deep, and they have snap-on lenses and use a 3-wire pigtail.
    view full answer...
  • Recommended LED Trailer Lights to Replace Incandescent Lights
    I may have some replacement LED lights for your trailer but none of the 8-1/2 by 4-1/2 inch lights we carry are LEDs. The Low Profile LED RV Tail Light # RVSTLB61 for the driver's side and # RVSTLB60 for the passenger's side might work for you.
    view full answer...
  • Availability Of Angled Mount Base For Trailer Tail Lights
    Currently the only angled bases we have for trailer lights are the White # RV60BK and Black # RV60BBK wedges. These will fit either the White # RVSTL60, # RVSTL61 or Black # RVSTLB60, # RVSTLB61 trailer lights. These lights are just over 1" shorter than the Light # 30-92-004 you found. For that light you would need to either find a base in a salvage yard or have one manufactured.
    view full answer...
  • Replacement Passenger & Driver Tail Lights For A 2018 Heartland RV Pioneer Travel Trailer
    I went ahead and checked out what we have for your 2018 Heartland RV Pioneer Travel Trailer, and the closest I was able to find is the: -Low Profile LED RV Tail Light - Stop, Tail, Turn - 9 Diodes # RVSTLB60 for the passenger side, & the, -Low Profile LED RV Tail Light w/ License Bracket # RVSTLB61 for the driver side. These lights measure 8-11/16" long and 3-3/16" wide.
    view full answer...


< Previous



Do you have a question about this Trailer Light?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Adele M
Updated by:
Adele M
Employee Amy B
Updated by:
Amy B
Employee Brian T
Updated by:
Brian T
Employee Laura H
Written by:
Laura H
Employee Dustin K
Video by:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Hayden R
Installed by:
Hayden R
Employee David F
Test Fit:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.