Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens
(19 reviews)
Price: $25.66
In Stock
Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens
Item # PM425-3
Our Price: $25.66
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (19)
- Q & A (0)
- Photos
Peterson Trailer Lights - PM425-3
- Tail Lights
- Round
- Incandescent Light
- Red
- 5-1/2 Inch Diameter
- Recessed Mount
- Rear Reflector
- Stop/Turn/Tail
- Non-Submersible Lights
- Peterson
5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.
Features:
- Combination trailer tail light serves 3 functions when properly mounted
- Stop light
- Tail light
- Turn signal light
- Vibar socket absorbs road shock and vibration to prolong bulb life
- Incandescent bulb can be easily replaced
- Durable steel housing with powder coat finish resists rust and corrosion
- Red lens over incandescent bulb
- Compatible with 12V DC systems
- Flush mount with built-in mounting flange
- Requires 4-1/2" diameter hole for installation
- 2-Wire design includes power leads - grounds through mounting stud
- DOT compliant
- Made in the USA
Specs:
- Dimensions: 5-1/2" diameter x 1-5/8" thick
- Light face dimensions: 4" diameter
- Distance between mounting holes (center on center): 4-1/4"
- Bulb type: 1157
- Power draw at 12.8V: 2.2 amps
- 1-Year limited warranty
Recessed-Mount Light
Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.
M425 Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Round - Flush Mount - Red Lens
California residents: click here
Customer Reviews
Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens - PM425-3
Average Customer Rating: 4.9 out of 5 stars (19 Customer Reviews)
5-1/2" Round. Incandescent trailer light functions as a stop, tail, and turn signal. Vibar socket absorbs road shock and vibration. Durable steel housing. Flush mount with built-in flange. 2-Wire design with power leads. (1) 1157 Bulb.by: Charles 02/04/2024
great details on products always seem to have whatever you need a 1 stop shop thanks etrailer
by: Craig 11/26/2023
ordered lights for a jeep build, service was great and more important comunication ofter lights were delivered coundn't have been any better
thanx very happy!
by: David 08/17/2023
Just looks like they could have been packaged better.
I'm hoping they are ok. The communication was great though.
by: Calvin L.05/20/2018
Product arrived quickly and in great shape. They were a direct fit for my Fruehauf 4X8 trailer and they looked great, too. The same day they arrived, I was back on the road; easy installation.
by: Tommy f04/26/2018
Received replacement taillights and they work great. Just like my old ones. Had the trailer for 34 years so time for some new ones.
by: Daniel S08/26/2014
Thanks. Order received in good order! Parts are exact replacements for the defective ones on my used 22 yr old trailer! That made installation easy! Thanks again for the availability and quick service.
by: Manuel 03/01/2021
The product was exactly what I needed. In fact is was identical to the original tail light I was replacing. Fit perfectly on my 1951 m38 military jeep.with no modifications what so ever. I am very pleased with the purchase. I will be shopping here again.
by: Joe 03/14/2023
JUST WHAT THE DOCTOR ORDERED. THANKS,
by: Troy 11/12/2021
Great taillight
by: Ben 11/01/2020
Best place to buy trailer parts
by: Joel G07/16/2020
These lights performs like a champ! Happy with their function.
by: Kenneth 12/17/2022
This is the exact light I needed.
by: Michael 11/11/2021
Worked as intended
by: John 02/12/2024
by: Kara 07/21/2023
by: Jean 10/07/2021
by: Craig 08/16/2021
by: Dwain 10/18/2022
by: Clinton 03/09/2021
19
19
See what our Experts say about this Peterson Trailer Lights
- Tail Light Recommendation to Replace a SAE AIST 04 DOT 2The Red Trailer Light, Flush Mount # PM425-3 that you referenced would be the correct replacement light for your trailer. This light has a lens diameter of 4 inches. For further dimensions to compare to your old assembly check out the picture I attached.
view full answer...
- Replacement Round Trailer Light for 4-5/8" OpeningFor a light that fits your 4-5/8" opening I recommend the Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens # PM425-3. This light will fit a 4-1/2" diameter hole so your hole will be just a little bit larger. This light comes with a steel housing so the overall dimensions are 5-1/2" diameter x 1-5/8" thick. The distance between the mounting holes is 4-1/4" on center.
view full answer... - Peterson Trailer Light PM425-3 Round Lens Gasket ReplacementThere is not a replacement gasket that we carry for the lens of the Peterson Trailer Tail Light w/ Steel Housing - Stop, Turn, Tail - Incandescent - Red Lens # PM425-3. I recommended using the Loctite RTV 598 High-Performance Silicone Gasket Maker - Black - 2.7-Fl Oz Tube # LT37467 to keep moisture, dirt, and debris out of the assembly.
view full answer...
- What Is The VIBAR Socket In The PM425-3, Red Trailer Light Is It A Brass Socket Or Something ElseThe VIBAR socket that is referenced in the item description for the Red Trailer Light, Flush Mount, part number PM425-3, is a vibration dampening feature that this light now has and does not affect how the bulb is installed in the light. You will still have a brass socket to install the 1157 bulb in and the VIBAR feature should allow the bulbs to last longer. This light is the direct replacement for your existing taillight.
view full answer... - Replacement Lights for 1989 Interstate Box TrailerThe diameter you are looking for is 4-1/2" on the # STL42RB. This would be the widest part that would fit into the hole on your trailer. We do not have an LED option without the plug but we do have the Peterson # PM425-3. This has the same mounting hole dimensions and is also 4-1/2" at the widest point on the back. If you decide to stick with the Optronics light you will need the # A47PB or # A45PB.
view full answer...
- Replacement Bulbs & Light Assembly Peterson Trailer Tail Light w/ Steel Housing On Circle J Trailer It appears you have the Peterson Trailer Tail Light w/ Steel Housing # PM425-3. You will need to lift the clip to pull out the lens and gain access to the 1157 Bulb # DI79VR. You can also consider upgrading to LED Bulbs # ARC93FR for increased bulb life.
view full answer...
- Replacement 4-Inch LED-Type Stop/Turn/Tail Lights to Replace Peterson PM425 Incandescent LightsThe Peterson Red Trailer Stop/Turn/Tail Light you referenced, part # PM425-3, takes an 1157-type bulb. We do offer replacrment LED-type bulbs in the 1157-type. For example, Putco offers their red 360-degree-radiation 1157 bulbs as a set of two, part # P231157R360. For a lower-cost option we also offer the CIPA EVO Formance 1157 Round White LED Bulb Set, part # CM93236. LED lights will substantially reduce the power drawn by your trailer - they use about 1/10th that of standard incandescent...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Adam R
Video Edited:
Jeff D
Updated by:
Laura H
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Joel G.
7/17/2021
They work just fine whenever I use the trailer. No problems after a year of occasional use.