bing tracking image
  1. Trailer Wiring
  2. Hopkins
  3. Wiring Adapters
  4. Single-Function Adapter
  5. 4 Flat
  6. Plug and Lead
Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48"

Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48"

Item # HM47114
Retail:$27.60
Our Price: $17.11
You Save: 38%
Trailer Wiring
Shipping Weight: 0.38 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Increase the length of your 4-way flat connection by 48" with this extension loop. Large grip rings on both ends provide maximum leverage when disconnecting. Plugs into your existing 4-way flat connectors. Great Prices for the best trailer wiring from Hopkins. Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48" part number HM47114 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (36)
  • Q & A (0)
  • Photos

Hopkins Trailer Wiring - HM47114

  • Wiring Adapters
  • Single-Function Adapter
  • 4 Flat
  • Plug and Lead
  • 0 - 5 Feet Long
  • 4 Flat
  • Hopkins

Increase the length of your 4-way flat connection by 48" with this extension loop. Large grip rings on both ends provide maximum leverage when disconnecting. Plugs into your existing 4-way flat connectors.


Features:

  • 4-Way flat extension loop increases the length of your wiring connection by 48"
    • Plugs into the 4-way flat connectors on your vehicle and trailer
  • Easy-to-pull rings on trailer and vehicle ends make 4-way easy to disconnect
    • Ring handles make it easy to pull connectors straight back for proper leverage
      • No wiggling plugs or damaging terminals
    • Wide handles make it easy to grip connectors
  • Corrosion-resistant terminals are long-lasting
  • Comes with 1 dust cap and a terminal grease packet for electrical connections


Specs:

  • Ring inner diameter: 1"
  • Ring outer diameter: 1-7/8"
  • Wiring harness length: 48"
  • Wire configuration:
    • White: ground wire
    • Yellow: left turn/brake light
    • Green: right turn/brake light
    • Brown: tail lights
  • 3-Year limited warranty


Easy-Pull Ring Handles Are Easy to Grip and Pull

Easy Pull

Standard 4-way flat plugs have a small surface area to grip when you are pulling them apart, forcing you to wriggle the plugs back and forth to loosen them. Some users even pull on the wires. This can lead to broken terminals or ripped wiring. With the Easy-Pull extension loop adapter, each plug has a large grip ring designed to make disconnecting a snap. Simply slide your finger into the ring and pull the plug away from the opposite plug to disconnect.


Easy Pull Rings

The Easy-Pull is also available as a single trailer-end or a single vehicle-end 4-way flat plug. Combine this Easy-Pull extension with either the vehicle-end plug or the trailer-end plug for the easiest possible disconnection. With ring handles on both connectors, disconnecting is as simple as gripping the rings and pulling straight apart. No wriggling, no broken terminals, and no damaged wires.



47114 Hopkins Easy Pull 4-Pole Flat Extension Loop - Vehicle End and Trailer End Ring Handles - 4' Long




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48" - HM47114

Average Customer Rating:  4.8 out of 5 stars   (36 Customer Reviews)

Increase the length of your 4-way flat connection by 48" with this extension loop. Large grip rings on both ends provide maximum leverage when disconnecting. Plugs into your existing 4-way flat connectors.

by:

I purchased the Easy-Pull extension along with the 7 to 4 pin adapter a few years ago. I was very happy with it, but I had them stored outside the entire time on my hitch through Pennsylvania winters and summers. That took its toll on it and the connection pulled apart. That did not deter me from reordering the exact same product replacement. If I keep it stored outside again, I will keep it shielded from the elements.



by:

Very fast shipping and customer service is great



by:

My review is basically on the DESIGN ONLY, because I haven't used it very much so I can't give a honest review on the actual quality, the DESIGN is awesome, the idea of making such where you can pull directly out is ingenious, some of us who are used to having to wiggle such to pull connections apart need to break that habit with this new design, I DO recommend using some type of electrical grease on the terminals when you attach.

Possumpete

6/21/2020

After a year of use I would highly recommend



by:

Purchased this to supply power to the Lets Go Aero LED Light Kit I installed on our cargo basket. The Easy-Pull is truly much easier to disconnect than the conventional plug. Friends have borrowed my hitch basket and subsequently purchased the Easy-Pull for their own use because of the utility of this accessory.



by:

This wiring set up makes trailer electrical hook ups much better of an experience. Everything attaches quickly and effortless. Before it was a pain especially after the wiring had a season on it.



by:

These save your fingers, makes connecting and disconnecting easy.

Wally130h3lm

5/16/2021

Still working great, would never have a trailer without them.



by:

Bought to use as a back up after some stole my regular light cord (one of this company's coiled 4 flat to round plugs). Seems like a great product and if it is half as good as the other product I will be happy. It is small and easy to carry as a back up if something happens to whatever you normally use. When something happens to your lights like I had happen this is a great insurance policy.



by:

Wiring harness is awesome. Good quality, good price. Clever idea. First one was damaged during shipping and they had a new one at my door within a week..very happy.



by:

Excellent, heavy duty, high quality extension. Only wish they had more sizes. Used between my RV and my vehicle on a dolly.



by:

This is exactly what I wanted and it works perfectly. The best thing about this part is the rings to pull it apart from the connector



by:

WHEN I SAW THIS ITEM I LOOKED REAL HARD TRYING TO SEE IF IT WAS TH REAL DEAL GUESS WHAT IT SURPASSED MY EXPECTATIONS VERY GOOD QUALITY AND EASY TO DISCONNECT.



by:

Makes connecting and disconnecting easy, no more knuckle busting



by:

Very good product. The socket pull holes on the wire terminals make it very easy to connect and disconnect.



by:

Excellent design. So much easier to grasp the connections with the hole, plug in, and unplug.



by:

Great website, great customer service, had a slight issue which they resolved immediately... Don't hesitate, these folks are the best!!!



by:

Well built - like the loops for disconn ecting.



by:

Excellent product, exactly what I needed, and fast service. Thank you.



by:

solved my problem. working great.



by:

Easy to install and remove if necessary.



by:

Great Product selection and great price s!!!



by:

Product arrived on time, in perfect condition.



by:

Perfect, just as described!! Thank you



by:

Just exactly as I expected, TY



by:



by:


25
36
Show More Reviews

See what our Experts say about this Hopkins Trailer Wiring

  • License Plate and Taillight Relocation Kit for a Thule EasyFold XT That Is Obstructing Taillights
    There are no Thule made kits for the Thule EasyFold XT, however you can just use the License Plate and Tail Light Relocation Kit for Yakima EXO System # Y74VR. This is just a simple license plate and taillight relocation kit that'll utilize your vehicle's existing 4-pole connector. If there is not enough slack on the included pigtail harness, you can use # HM47114 for a 48" extension. Since this was made for the Yakima EXO system it's almost guaranteed that you're going to have to get...
    view full answer...
  • Recommended Trailer Hitch Receiver For a 1979 F-150 Lifted 9" With 38" Tires
    The Curt Trailer Hitch Receiver # C13099 will fit your 1979 Ford F-150 with the deep drop rear bumper. This receiver is a class III rated for towing up to 6,000lbs of trailer weight with up to 600lbs of tongue weight. It can tow up to 10,000lbs with up to 1,000lbs of tongue weight by using a weight distribution hitch. To tow a trailer you will most likely need a hitch like the Gen-Y Adjustable 2-Ball Mount # 325-GH-317 which has a 15" drop. When not towing you can add the Step # GY79VR...
    view full answer...
  • Available Lengths of 4-Pole Trailer Wiring Extensions
    We do offer 4-pole extensions that can be used with the 7-Way to 5-Way/4-Way Trailer Adapter for Vehicles with Lamp-Out Sensors Towing Trailers with LEDs # C35FR. We have 4-pole extensions in many lengths including the 10-foot # HM48235, 4-foot # HM47115 and # HM47114, and 2-foot # HM47004.
    view full answer...
  • Can Main Harness of Aero Pro LED Trailer Light Kit be Extended Longer
    The 4-way wiring harness that comes with the # TL16RK is 25 feet in length and while we don't have a version that comes with a longer harness you could pretty easily extend this 4 more feet with the # HM47114.
    view full answer...
  • What Lengths Are The 4-way Flat Extension Harnesses Available In?
    It sounds like you are looking for a 4-way flat extension harness. I recommend the Hopkins Endurance Easy-Pull 4-Flat Extension 12" # HM48144. 24" # HM47004, or 48" # HM47114. These extensions will plug into the 4-way flat connector on your tow vehicle and the connector on your trailer and have an easy pull finger loop to make disconnecting the harness even easier. If this is not the extension you meant just let me know. I included videos for the products mentioned for you to take a look at.
    view full answer...
  • Recommended Wiring Extension to Use With Curt Hitch Extension
    I have several options for wiring to use with the Curt Hitch Extension # C45048 depending on what kind of connection you need. If you are looking for a 7-way extension then I recommend the TorkLift Wiring Harness Extension for 32" SuperTruss Hitch Extender - 7-Way RV # TLW6032. For a 4-way extension we have the Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48" # HM47114. Finally if you're going from a 7-way to a 4-way I recommend the Adapter...
    view full answer...
  • 4-Way Extension to Get 4-Way Up to Front of Homemade Trailer
    That looks like a standard type of connector that vehicle manufacturers will use for various connections. I couldn't give you a part number for it though. Easiest option would probably be to cut that off and then use the 4-way extension part # HM47114 which is 4 feet long to get you a standard 4-way ran to front of vehicle.
    view full answer...
    Image 1 for
  • Solution for 36 Inch Hitch Extension on 2020 Ram 3500 With Arctic Fox 992 Camper
    The only other extension that will meet your 36" requirement is the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long # RP45018. This extension would have a maximum gross trailer weight of 7,500 lbs/750 lbs of tongue weight at 41" with weight distribution. Also, this does not have lateral-support safety chains like the TorkLift does. When you use a really long extension like the # TLE1536 there is a lot of additional force. This is why it seems like overkill to use this...
    view full answer...
  • Is There a Way To Store 4-Way Inside 2020 Chrysler Pacifica
    Normally the Tekonsha trailer wiring harness part # 118723 is stored outside of the vehicle like you mentioned. In order to store it in the interior of the vehicle you'd need to find a grommet in the truck floor (if present) and route the 4-way through it so that it could stay inside away from the weather. Since this isn't how this was designed to be used/installed there's a chance the harness wouldn't be long enough. If this is the case we have extensions like the part # HM48144 which...
    view full answer...
  • Availability Of 48 4-way Extension For Using Brake Light CR-007 With 48 Hitch Extender
    There sure is! You'll need the Hopkins 48" 4-way Extension # HM47114 to allow the Brake Light # CR-007 to work in the Reese extension you have with your truck bed camper installed.
    view full answer...
  • Trailer Wiring Adapter for 2019 Ford F-250 to Provide Lighting for Headache Rack
    Usually headache racks that have taillight functions like what you mentioned use a standard 4-way trailer connector to power the lights so your best solution is the part # C55384 which plugs in line with the 7-way you have now and provides a 4-way and harness you can use for the headache rack and also leaves the 7-way totally functional. You'll want a 4-way extension too with part # HM47114.
    view full answer...
  • Yakima License Plate and Tail Light Relocation Kit Wiring Harness Connection Type
    The wiring for the Yakima License Plate and Tail Light Relocation Kit # Y74VR will have connections to a main harness that plugs into a 4-way flat trailer connector. It then has separate connectors for each of the taillights as well as the license plate light. The length of the wiring is designed specifically to fit the Yakima EXO system but you should still have enough length when mounting to your Kuat bike rack. A Hopkins Endurance Easy-Pull 4-Flat Extension # HM47114 can also be used...
    view full answer...
    Image 1 for
  • Recommended 4-Way Flat Wiring Harness For an Aluminum Trailer
    I prefer to us a harness like the 25 Ft 4-Way Trailer Wiring Harness # A25W2GWB as it has a ground wire that will run the full length of your wiring so you will not have to tap into the trailer for a ground source. This will help you to waterproof your connections to your tail lights using Heat Shrink Butt Connectors # DW05744-10 and reduce the chances of corrosion/oxidation between the ground wire and trailer frame leading to issues with the lights later down the road. Since the front...
    view full answer...
  • Solution For Trailer Wiring Coming Unplugged On Sharp Turns
    The shortest ball mount available for your application is the Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop # C45534. This is class 3 and rated 7,500lbs max towing capacity. It measures 7-1/2" from center of hitch pin hole to center of ball hole. If this is not short enough, then you will want to just go with a trailer cord extension which is a safer route anyways. If you have a 4 way flat trailer plug then go with Hopkins Endurance Easy-Pull 4-Flat Extension #...
    view full answer...
  • Recommendation for Extending 4-Way Connector at Rear of RV
    For a temporary lighting solution I recommend the Roadmaster # RM-2120 standard magnetic tow lights. Super-easy to hook up.
    view full answer...
  • Availability of 4-Way to 4-Way Extension Harness
    We do have 4-way to 4-way extensions in a few sizes. Like with the part # HM47114 for 48 inches, part # HM47004 for 24 inches or part # HM48144 for 12 inches. We also have 6 foot part # RM-300150-00.
    view full answer...
  • 4-Pole Wiring Extension for Connecting Reese RAM Lighted Hitch Cover RP86531 on 2015 Ram
    If you want to install the Reese RAM Lighted hitch cover # RP86531 and its 16-inch-long 4-pole wiring harness is not quite long enough to reach your truck wiring you can simply use an extension. We have 4-pole extensions in many lengths, such as the 12-inch # HM48148, 24-inch # HM47004 and 48-inch # HM47114. We also have a 10-foot extension # HM48235 but this one does not have the special Hopkins Easy-Pull connectors found on the other extensions listed.
    view full answer...
  • Recommended 4-Way Connection Between Towed Vehicle and Motorhome
    The only real advantage of the 4 round over the 4 flat trailer connector is the clean look of the connection point and the protection from elements when not in use. For instance the Pollak Heavy-Duty, 4-Pole, Round Pin Socket, Concealed Terminals - Chrome - Vehicle End # PK11410 has a clean finished look on the front of a towed vehicle and will protect the connection from dirt and debris with the spring loaded cover. Many people like the connection between the motorhome using a harness...
    view full answer...
  • Is There a Coiled 4-Way To 4-Way Extension Available?
    The Wesbar Trailer End Connector - 4-Flat - Coiled # 54000-026 will work to connect a 4-way plug like # HM48190 to the pigtail end to create exactly what you are seeking. Otherwise, we have options like the Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48" # HM47114 to span that distance without the coiled wire.
    view full answer...
  • Replacement 4 Pin Male and Female Connectors for Trailer Light Wiring
    Yes, what I like to recommend in your case is an Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48" # HM47114. This will make things easier to splice in line by simply cutting the extension in half. Then you will have 2 weather sealed ends that you don't have to worry will get wet or that the wires will pull away from the end. The large rings also give you an easy pull handle to prevent damage to the wires.
    view full answer...
  • Bike Rack Recommendations for 2 Bikes and Bike Trailer
    I really like the Thule DoubleTrack Pro XT Bike Rack # TH92BJ for your bikes because it's a solid but modest option from Thule. It is compatible with both 1-1/4" and 2" hitches plus it can accommodate up to a 46-1/2" wheelbase. This is only for the bikes so you would need to store the trailer somewhere else. If you're wanting something that will also hold that Burley Minnow Trailer then you need the Hollywood Racks Sport Rider SE2 Bike Rack w/ Cargo Carrier for 2 Bikes # HR1450Z-85. This...
    view full answer...
  • Is There a Hopkins Easy-Pull 4-Pole Extension Available That is 8 Feet Long?
    The longest Hopkins Endurance Easy-Pull Harness 4-Pole Flat Extension offered will be the # HM47114. This will be 48 inches long and all the Easy-Pull Harnesses will come with 18 gauge wires for the brown (taillight), green (right turn and brake), and yellow (left turn and brake) wires and then the white (ground) is a 16 gauge wire. This will typically be the standard used with most manufacturers. If you wanted something more heavy duty, you will need assemble one. The Deka Wire - Jacketed...
    view full answer...
  • Is There A Way To Increase The Distance Between Lights On Curt Auxiliary LED Trailer Lights?
    I may have a solution for you, however, there is not an adapter available for the Curt Auxiliary LED Indicator Lights # C53201 that will increase the distance between the light bars. If you just needed more overall length of the wiring harness then you could add Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48" # HM47114 between the Curt light kit and the tow vehicle, but this will not extend the wiring on the light bar. Since the wires on that...
    view full answer...

Do you have a question about this Trailer Wiring?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Shane H
Installed by:
Shane H
Employee Alexander C
Written by:
Alexander C
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.