Is There a Way To Store 4-Way Inside 2020 Chrysler Pacifica
Question:
i have a 2020 pacifica touring plus and i would like if there is a way to put the trailer wire harness inside the van i dont like the plug on the outside they go bad with the weather even if they are covered they corrode thanks any info will help
asked by: John
Expert Reply:
Normally the Tekonsha trailer wiring harness part # 118723 is stored outside of the vehicle like you mentioned. In order to store it in the interior of the vehicle you'd need to find a grommet in the truck floor (if present) and route the 4-way through it so that it could stay inside away from the weather. Since this isn't how this was designed to be used/installed there's a chance the harness wouldn't be long enough.
If this is the case we have extensions like the part # HM48144 which is 12 inches long and the part # HM47114 which is 4 feet long.
Products Referenced in This Question
Hopkins Endurance Easy-Pull 4-Flat Extension w/ 2 Grip Rings - Vehicle and Trailer Ends - 48"
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 4 Flat
- Hopkins
more information >
Hopkins Endurance Easy-Pull 4-Flat Extension w/ 1 Grip Ring - Vehicle and Trailer Ends - 12"
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 4 Flat
- Hopkins
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Continue Researching
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Replace or Install an RV Roof Vent
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Q&A: Brake Controller and 7-Way Install on 2013 Chevy Express w/ Tow Pakage
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Q&A: Replacement Fan Recommendation for the MaxxAir 4700K
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Hub and Drum Assembly with 8 on 6-1/2 Bolt Pattern for Dexter 10,000 Pound Trailer Axle
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch