The most heavy duty trailer hitch we offer for a 1987 Chevrolet K20 is the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25198 which is rated for 16,000 lbs followed by the Curt Trailer Hitch Receiver part # C15511 which is rated for 15,000 lbs. These are both bolt-on options which are designed for models with a deep drop bumper. I recommend the Curt Trailer Hitch Receiver because of the cost savings. view full answer...
I checked with Draw-Tite and although the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75034 is not listed for models with the heavy duty suspension, the Ultra Frame Trailer Hitch Receiver part # 41947 is so this is what I recommend.
I also checked with Curt but there was no mention of fit on models with the heavy duty suspension. view full answer...
I reached out to my contacts at B&W and they have created a rendering of the Heavy-Duty Trailer Hitch Receiver # BWHDRH25602 on the 2017 Ford F-350 Super Duty complete with measurements just for you. The hitch receiver tube only sticks out 1/8" past the bumper (see picture). view full answer...
There is a great option for a heavy duty trailer hitch receiver that fits a 2019 Ram 3500 Cab and Chassis, the Curt Trailer Hitch Receiver # C15400. This behemoth of a hitch is a Class V with a 2 inch receiver and has a 2,550 lb tongue weight capacity along with a 17,000 lb towing capacity.
This hitch is designed to fit so long as your '19 Ram 3500 has a frame that is 34 inches outside to outside and I have added a link to a video install as well as the written instructions for you to... view full answer...
I recommend using the Roadmaster Quiet Hitch # RM-062 to keep the Curt Heavy Duty Forged Ball Mount for 2-1/2" Hitches # C83JR stable in the hitch receiver. The Quiet Hitch essentially clamps the ball mount to the hitch receiver so there isn't any tolerances for the ball mount to move around in. It's a pretty simple device but it's also very effective.
Attached is a review video for you to check out! view full answer...
From the top of the mounting plates to the top of the B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25124 receiver is a 5-1/4" drop and then from the rearmost bolt hole to the end of the receiver is 10-7/8" (see attached). view full answer...
Yes, the Draw-Tite Trailer Hitch Receiver # DT45508 will fit on you 2001 Ford F-350 XL Super Duty. This will allow you to use either the 34" # RP45292 or 41" # RP45018 extension in the 2-1/2" Receiver.
Do remember you will need a Wiring Extension # TLW6042 as well to connect your trailers electrical connection. view full answer...
As long as your 1984 GMC K3500 Pickup has an 8' bed I recommend the B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V # BWHDRH25198 if your truck has the Deepdrop bumper, or B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V # BWHDRH25122 if your truck has the standard or step bumper.
Both of these trailer hitch receiver's have a 1600lb maximum tongue weight rating, and 16000lb maximum trailer weight rating, but you will want to check the owner's manual of your K3500... view full answer...
Since there are no custom fit receivers for your 2020 E-450 motorhome you will need to use a universal hitch. The Curt Class 5 Universal Hitch # C47CR fits frames up to 44" wide. This is a weld-on hitch so we recommend taking it to a certified welder for installation. The maximum gross trailer weight of 16,000 lbs and tongue weight of 1,600 lbs is as heavy duty as it gets. Keep in mind, you will be limited by the towing capacity of your motorhome. view full answer...
For a class V hitch on your 2022 Ford F-350 cab and chassis you are going to want the Draw-Tite Ultra Frame Trailer Hitch Receiver item # DT52MR. This hitch is custom fit and bolts directly to your Ford with included hardware. It has a 2" receiver and a maximum gross trailer weight of 18,000 lbs. The Curt Heavy Duty Forged Ball Mount for 2" Hitches - 5" Rise - 6" Drop - 17,000 lbs item # C45342 will work great with this hitch.
For a heavy duty ball mount that fits a 2-1/2" receiver and... view full answer...
We have the exact hitch you need for your motorhome on a 1999 Ford E-350 Super Duty chassis, the Curt Trailer Hitch Receiver # 14053.
This has the 10,000 lb towing capacity and 1,000 lb tongue weight capacity you wanted (the most available), and it does not have to be welded on. The installation will require you to drill small holes in the frame (all hitches that fit your motorhome will) and this will let you bolt the hitch right on.
I have added a link to a video review and the installation... view full answer...
I do have a solution, but the # C15800 will not fit your 2018 Coachmen Pursuit Precision Motorhome 27DS. For a heavy duty hitch you need the Curt Class 5 Universal Hitch # C87CR. This fits frames up to 44" and has the same high capacity with a 2-1/2" receiver. If you want a 2" receiver you can use the # 15902 instead. You will need to take the hitch to a certified welder for installation. view full answer...
I spoke with B&W about the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25198 and they informed me that the distance between the mounting holes left to right is 37-1/8". view full answer...
It sounds like you need the Gen-Y Adjustable Receiver, part # 325-GH-525.
This hitch receiver installs into your existing receiver and has 5 different positions providing different amounts of rise or drop, up to 10 inches. It also has a weight capacity up to 16,000 pounds. view full answer...
To secure your Curt Heavy Duty Forged Ball Mount for 2-1/2" Hitch # C93JR to the hitch receiver I recommend using both the etrailer Hitch Receiver Lock # e98881 along with the Roadmaster Quiet Hitch # RM-062.
The locking hitch pin helps deter theft of the ball mount while the Quiet Hitch acts as an anti-rattle device and keeps the ball mount from moving inside the receiver itself.
I've attached a few review videos for you to check out! view full answer...
The Draw-Tite Trailer Hitch Receiver # 41913 is the correct heavy duty receiver for your 2019 Ram 1500. This will replace factory installed bumper ball mount style hitch that is on your Ram. I have linked a video below that shows us installing the new receiver on a 2019 Ram Bighorn. This hitch is rated for 1,700lbs of tongue weight and 15,000lbs towing or 17,000lbs towing with a weight distribution hitch. Be aware that this will not increase your towing capacity's given by Ram for your... view full answer...
The B&W Heavy-Duty Trailer Hitch Receiver # BWHDRH25182 will fit your 2006 GMC Sierra 2500HD if you have a 6-1/2' short bed. If you have an 8' long bed you will need their Receiver # BWHDRH25189 view full answer...
The Roadmaster Hitch Mounted Spare Tire Carrier # RM-195225 would be a great option for what you are looking for. This has a higher weight capacity of 400 lbs and has a hitch opening behind it so that you could still attach your tow dolly to it as well. view full answer...
Since you're wanting heavy duty, the best hitch for your 2005 F-250 is going to be the TorkLift SuperHitch Original Trailer Hitch Receiver item # TLF1002. This hitch has plenty of capacity for your horse trailer with a 10,000 lbs gross towing weight. It has both a 2" and 2-5/16" receiver.
For a ball mount, you will want the B&W Tow & Stow 3-Ball Mount item # BWTS20049B. This ball mount will fit a 2-1/2" hitch receiver. It has a 18,000 lbs capacity and a 7" drop. It has a 1-7/8", 2", 2-5/16"... view full answer...
The Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receiver # 38023 is a universal style hitch that is designed to be welded onto frames with a width of 33-1/2" to 34-1/2".
I recommend going with the TorkLift SuperHitch Magnum Trailer Hitch Receiver # TLF1002-30 that is custom fit for your 2002 Ford F-350 Super Duty. There is no drilling or welding required to install this receiver. The hitch has dual receivers, one 2-1/2" and the other is 2". An adapter sleeve is included to reduce the... view full answer...