I spoke with Swagman and they were able to confirm that the The Claw Fork Mount Bike Carrier # S64700 is in fact made of steel so you would be able to weld them like you're wanting to. view full answer...
The darkened panel on the Lippert Thin Shade Complete Window Kit Item # LC806621 is made of glass and not a plexiglass or other kind of plastic. view full answer...
The Curt # C45312 and the B&W # BWBMHD30011 ball mount are wholly manufactured in the USA.
Both ball mounts feature a 2 inch drop or a 1 inch rise if inverted. The B&W has a 16K capacity, with the Curt model having a 12K capacity. Both are designed for trailer balls with a 1-1/4 inch diameter shaft. view full answer...
We have one of these set up in our show room and the zipper does go along three sides of the bag. These bags work very well at protecting the cargo on a carrier from the rain.
I have included a link to a video reviewing the bag. view full answer...
The etrailer Trailer Hitch Receiver # e78KR you were looking at for your 2005 Honda Element is made in the USA, but the mounting hardware may be imported.
The etrailer hitch has a 350lb tongue weight rating and 3500lb trailer weight rating and an attractive black matte finish.
If you are planning on towing with your Element you will also need a vehicle wiring harness # C59236 and a hitch ball, ball mount, and hitch pin and clip which can all be found in the etrailer Ball Mount Kit # 989900.
I... view full answer...
The Curt Trailer Hitch Receiver part # C13394 which is a fit for a 2019 Toyota Highlander is made in the USA. This hitch provides a class III 2" receiver tube opening. view full answer...
Yes, the Optronics Opti-Brite LED RV Dome Light # ILL22CHB that you referenced features a sonically sealed housing and lens that makes it completely waterproof. This along with its LEDs will provide you with a really long lasting assembly.
I have attached a short video review that you can check out as well. view full answer...
The Stabilizer Jacks - 6-1/4" Drop Leg Travel # TJ01RT-HD that you mentioned are not spring loaded. This jack uses a series of internal steel notches to be able to give you the perfect height adjustment for your trailer, while still providing a high weight capacity.
These jacks have a weight capacity of 1,000-lbs, and a single leg lift capacity of 650-lbs.
Attached is an installation video for you to check out as well. view full answer...
The Trailer Idler Hub Assembly # AKIHUB-545-2-2K comes with the bearings packed with a Lithium complex, multipurpose grease. You must make sure to use another lithium complex grease like the Grease # L11390. It does not have to be the same color, you only need to ensure the grease has a lithium complex. view full answer...
The Titan Chain Alloy Snow Tire Chains # TC2321 are made in China. If you're looking for a USA made tire chain you could use something like the pewag Tire Chains # PWE2228S. However, you will need to make sure these work with your current tire size and check your owner's manual for any other restrictions. Unlike the Titan Chain tire chains these are not class S compatible. view full answer...
Spare tire cover # 052963751000 will do about as well as any other cover when used in a desert climate. It isn't the heat so much as it is the UV rays and the dry air that causes covers (and tires) to degrade. There are products you can buy at your local auto parts store to condition and protect the vinyl as well as the rubber tires so that both will last longer than 18 months!
One tip I can offer is when looking at these products avoid any formulas that use alcohol, such as ArmorAll,... view full answer...
I spoke with my contact over at Brophy about stainless steel hitch ball # SC23-C and found out that the included nut and washer are not stainless steel but do have a zinc plating. This is common for stainless steel balls. The hardware used to secure the ball isn't stainless. view full answer...
The Malone Cargo 12, part # MPG901 polyester polymer construction is a hard, stable plastic that is closely related to the material in soda bottles, but at a significantly larger scale, and developed to withstand the forces of being on a rooftop. Physically speaking, the plastic on the Malone Cargo 12 is much stronger than the soda bottle material, but chemically speaking, similar. view full answer...
While we certainly can provide you with three of the Loadstar ST175/80D 13 Bias Trailer Tires # AM1ST77, we are not able to provide the date code prior to you receiving them. I will say that with the current state of the supply line, most of the tires that we ship are around a year from the manufacture date. It is rare to see a date code more than 24 or so months old, as we generally move our tires fairly quickly.
It is worth noting that our warehouse is climate controlled. Most tire manufacturers... view full answer...
The Tire Grip Vehicle Traction Recovery Tracks for Snow, Mud, and Sand - Qty 2 # 288-07411-2 weigh about 6-1/2-lbs each, so they're easy to move around and get situated when you need to use them. view full answer...
The boat trailer rollers like Yates # YR8244-105EC do not have a steel tube on the inside. They do have nylon bushings at either end but the rest of the roller is solid rubber. I have included a link to a video review of the roller for you.
For a shaft and pal nuts for this roller use # CE10725A. For a mounting bracket you could use # CE32004G or # CE10303G. view full answer...
I spoke with my contact at Titan and the Weld-on coupler # T1755000 is made in the U.S.A., formed in Wisconsin and assembled in Iowa. view full answer...