All of the pins on the Power Grip RV Power Cord Adapter # CAM55185 will be active. There isn't a single pin that is used with this adapter. view full answer...
When considering the country of origin of pewag chains like the # PWE2221SC, it truly depends on which chain model. I am happy to report, though, that the # PWE2221SC are made here in the U.S.A. They are confirmed to fit your 1999 Dodge Ram Pickup with size 245/75-16 tires. As with all tire chains, I recommend consulting with your vehicle's owner's manual to make sure you are abiding by all of the manufacturer's guidelines. view full answer...
The temperature rating for the 10 Gauge Jacketed 2 Wire is 105 degrees celsius. According to the information I found, 10 gauge wire with a 90 degree celsius insulation is rated to 40 amps. With 105 celsius insulation, it should be able to handle over 40 amps. view full answer...
The exterior of the MagnaFlow Ceramic Catalytic Converter part # MF93219 is made entirely of 409 stainless steel. The only part of the converter that is not stainless steel is the honeycomb core. view full answer...
Both the Longview towing mirrors, # LVT-3100C, and the CIPA towing mirrors # CM11400 use plastic mounting hardware including the threads. Plastic may not seem durable but it is corrosion resistant and will also help prevent over-torquing the hardware which could damage the factory mirror housing. I have linked video reviews of both mirror sets for you. view full answer...
We do offer a USA-made hitch ball with specs similar to the one you referenced.
B and W offers their 2-5/16-inch hitch ball # BWHB94004. This has a gross weight capacity of 30,000-lbs, a 1-1/4-inch diameter shank that is 2-1/2-inches long, a fine thread pitch (12 TPI) and includes the lock washer and nut. All heat-treated parts have a raw finish. view full answer...
The 35" Long Safety Chain with Clevis Slip Hook, 5,400 lbs. part # 1483-535-04 I do show as being made/manufacturer in the USA which would apply to both the chain and hook. That said, it does not look like there are any origin markings on the hook. view full answer...
The Yakima HoldUp 4 Bike Rack - Platform Style - Tilting - 2" Hitches # Y02443-2 has a weight of 98 lbs without bikes on it. The two parts weigh 49 lbs each so you can use the HoldUp2 bike alone at that weight or add the additional 2 bikes at 49 lbs additional carrier weight.
When combined the rack has a total weight capacity of 200 lbs total with an individual bike weight maximum of 60 lbs.
With all the packaging the shipping weight is 114 lbs. view full answer...
The Firestone air compressors such as # F9377 can handle typical moisture like what might splash up from the road when driving in the rain. But it is not designed to be submerged under water. For something to be waterproof it has to be able to be submerged under water for a certain amount of time and not let any water in.
It will be perfectly fine under your truck so long as you aren't planning on driving into any deep bodies of water! That is why Firestone makes a mount bracket, # F2530,... view full answer...
I may have a solution for you if you're looking for a Pintle mount that is Made in the USA, but the Buyers Products 2" Pintle Hook Mount - 1 Position - 9" Shank # 337PM84 is manufactured overseas. However, B&W makes all of their products in the USA so you may want to have a look at the B&W Pintle Hook Mounting Plate for 2" Hitches - 9" Shank - 6 Hole - 16,000 lbs # BWPMHD14001, which is similar to the # 337PM84.
I've also linked our entire selection of B&W Pintle hook mounts that you... view full answer...
The Westin custom-fit bumper # 31012 is built to factory specifications to match your 1998 Dodge Dakota (fits all models but it won't be the exact bumper it came with originally.
The bumper # 31012 is chrome with black steps.
The step pads are a molded polymer plastic which creates a non-slip surface. As a result, provides you solid grip when you get in or out of your vehicle.
Mounting hardware is included as it's a quick and easy bolt-on installation. view full answer...
Each of our 10 Inch lube plates for fifth wheel hitches are made from nylon, which is going to just as good a job as the graphite lube plates so you don't have to use any grease. The 10 inch lube plates we offer are:
- Curt 10" Fifth Wheel Trailer Hitch Lube Plate # 16721
- Lube Plate for Reese 5th Wheel Trailer Hitches - 10" Diameter # RP83002
I have added links to video reviews of each of these lube plates for you to check out. view full answer...
The CIPA Replacement Side Mirror, # CM46410, is chrome-plated and plastic so it is made of metal and automotive grade plastic. The housing is chrome-plated. view full answer...
The # 337PM25812 pintle mount is manufactured in the USA, according to Buyers Products.
If you click the provided link, you can see a product description video featuring the # 337PM25812 pintle mount. view full answer...
The Curt jack part # C28304 is made in China.
We do have a similar rated and style jack, the Dutton-Lainson part # DL22683, that is made here in the US. This jack has the same 2,000 pound capacity and 15 inches of lift. It's also a weld on jack that swivels just like the Curt. view full answer...
A 5/8" diameter hitch pin is usually made of steel, though some have coatings applied to help resist corrosion.
For example, the Master Lock Pivot Lock Hitch Pin for 2" Hitches # ML1465DAT is made of stainless steel, but there is also a version - the Master Lock Pivot Lock Hitch Pin for 2" Hitches # ML1495DAT - which is a chrome-plated steel hitch pin with a chrome-plated aluminum barrel. view full answer...
The Integrated OEM Tailgate Lock, # LH-007, is designed to be an exact replacement to the factory handle. The locking mechanism is made of zinc coated steel, similar to the plating on heavy duty Grade 8 nuts and bolts. The handle is the same plastic that the vehicle manufacturer uses. view full answer...