I checked the material of the K-Source Replacement Side Mirror # KSH3661 in our warehouse. It has metal mounting brackets, arm, and hardware. The housing of the mirror itself is plastic but has the chrome finish to look like metal but resist corrosion. It has the same footprint and mounting points as the factory mirror on your 1993 Ford F-150 so it is an easy no-drill installation. view full answer...
I would be happy to shed light on this for you; Bearing Kit # BK1-150 is manufactured by TruRyde. It contains inner and outer bearing L44649, inner and outer race L44610 as well as grease seal 10-60.
I've added links to a couple video reviews of this kit for you to take a look at. view full answer...
For a similar 20k fifth wheel hitch that fits the OEM rail kit of your 2021 Ford F-350 that is made in the USA you'd want the B and W Companion Hitch part # BWRVK3300 but the Reese hitches are not made in the USA. view full answer...
A great American made hitch lock option is the etrailer Trailer Hitch Receiver Lock # e98881
This lock is for both 2" and 2-1/2" trailer hitches, and is rated for up to 15,000 lbs. It is also made of steel but is double chrome plated so it won't rust, giving you a lock with outstanding overall longevity. view full answer...
I spoke with my contact and B&W and the Custom Headache Rack # BWPUCP7500WA is made of 10 gauge steel except for the flat plates that attach to the bed sides. Those are 7 gauge.
This rack is not tested with toolboxes or tonneau covers so it is difficult to determine if it will work in conjunction with those items. It likely will not work if the tonneau cover blocks the lip in the inner part of the bed sides. view full answer...
The Draw-Tite ball mount, # 2753, is black powder coated for corrosion resistance. Most of the ball mounts we carry will be powder coated unless otherwise stated (like the aluminum ball mounts). This particular ball mount is considered long because it measures 9 inches from the center of the hitch pin hole to the center of the ball hole.
I have included a link to our ball mount FAQ for you as a reference. view full answer...
For your 2022 Ford Expedition with 275/65-18 tires I recommend the Titan Chain Snow Tire Chains - Ladder Pattern - V-Bar Links - 1 Pair item # TC2828. The V-bar studs on these tire chains bite into the ice to give you superior traction, while the ladder-pattern design assists with effective starts and stops. Durable low-carbon steel twist links also offer excellent grip in deep snow. view full answer...
The Bulldog # BD195369 3K capacity square tube jack you referenced is constructed of steel. The inner tube is zinc plated for extra corrosion resistance, the outer tube is gray painted steel.
I've linked you to our FAQ article about trailer jacks, which I hope you'll find helpful. view full answer...
The Titan Chain Alloy Snow Tire Chains # TC2219SCAM that you referenced are made of manganese nickel alloy which is incredibly strong. As long as you install these chains correctly, use them properly, and don't exceed their speed rating of 30 miles per hour you would not have to worry about them coming apart on you. We sell a lot of chains and haven't had any issues with these chains so I would recommend them for you.
I attached a review video for you to check out as well.
Lastly, you... view full answer...
The B&W Ball and Safety Chain Kit # BWGNXA2061 should last the life of the truck if not longer.
The ball is going to have a 30,000 pound rating so its tough. It might get some scratches or dings over time but unless metal is being scraped away, diminishing the diameter of the ball, there is nothing to worry about. view full answer...
The Adco RV Cover w/ Tyre Gards for 5th Wheel Trailer - All-Climate + Wind - Tyvek - 40' Long # 290-34857 doesn't come without the tire covers. The Tyre Guards are sold separately but they do not sell any cover without the Tyre Gards. The manufacturer basically adds the UV tire protection as a bonus, as they would otherwise cost you the additional money. view full answer...
The hitch tube of the Curt hitch part # C11405 that you referenced is totally open all the way through.
You may also be referring to the weld stop that some Class I hitches install in the tube to prevent the use of Class II accessories in them. Curt hitches do not have that.
Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported load like a bike rack. I attached a review video for you to check for the strap as well. view full answer...
You might have a brake controller in your 2004 Ford F-550 but Ford did not start having the option of factory installed brake controllers in their trucks until the 2005 model year. A previous owner of your 2004 Ford F-550 would have had to installed an aftermarket brake controller.
If you're looking for a replacement I recommend the Tekonsha Prodigy P2 Trailer Brake Controller item # 90885. view full answer...
I did a little digging and found that the Rear View Safety Wireless Side Camera # RVS-775W as a whole carries an IP68 rating. The 6 indicates that it is dust tight meaning dust cannot get in. The 8 indicates continuous immersion in water at a depth of 1 to 3 meters for a given amount of time. So what all that means is that rain or washing the RV will not cause water to get inside the unit and it will function properly. Unless the camera is submerged deep under water and/or underwater for... view full answer...
I spoke with my contact at Derale and he said the Derale Series 8000 Plate-Fin Transmission Cooler Kit, part # D13504 is made in the USA.
To install the Derale # D13504 cooler on your 2002 Ford F-250 7.3L diesel, you will also need the Derale Radiator Adapter Fitting, part # D13025. This adapter will allow you to connect the transmission cooler to the factory transmission cooler in your radiator tank without cutting or flaring of lines.
I am including a link to a FAQ page on transmission... view full answer...