The best trailer hitch we offer for a 2017 Subaru Outback with hidden design is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76227. The Draw-Tite hitch installs behind the rear bumper so it will be the most hidden and the receiver tube is also tucked neatly up under the bumper which will also allow for the best ground clearance.
Please note, you will have to remove the rear bumper for installation but that is how you get the hidden look. There is really no in between for a hidden... view full answer...
Yes. The Curt # C56040 is a confirmed fit for your 2021 Subaru Outback Wagon XT; we've even got a video of the installation for you that shows this harness being installed on a 2021 model. I've linked that video to this answer for you to have a look at. view full answer...
The Kuat adapter you are looking for is the # D101. This will adapter your 1-1/4 inch Kuat bike rack # B202-114 to fit into your 2 inch hitch on your 2016 Subaru.
I have linked the adapter to this page for your convenience. view full answer...
It looks like the Thule AeroBlade crossbars would need to be 53" long for your 2015 VW Passat which luckily matches with your 2022 Subaru Outback Wagon. This means you just need the Evo Raised Rail Feet # TH710401 and you can use the same crossbars!
If you'd like to add locks to the feet you can do so with the Key Kit # TH450400. view full answer...
Yes, the Curt Roof Rack for Raised Side Rails # C18118 will fit your 2022 Subaru Outback Touring XT with raised roof rails. This would then provide the crossbars needed to use the Malone Profile18B Rooftop Cargo Box # MPG911. The Malone Profile18B Rooftop Cargo Box # MPG911 uses clamps to attach to the crossbars so the fact that the Curt Roof Rack for Raised Side Rails # C18118 doesn't have channels doesn't make much of a difference for this use.
The Curt Roof Rack for Raised Side Rails... view full answer...
According to Thule, both the Thule Force XT L # TH6357B or Force XT XL # TH6358B will fit on your 2019 Subaru Outback. You'll want to make sure by measuring from the center of the front crossbar to the line where your roof meets the rear cargo hatch on your 2019 Subaru Outback for confirmation. You'll need 47-1/2" to use the # TH6357B (Force L) and 51-3/8" to use the # TH6358B (Force XL).
There really is only an 8" difference in the length of these two boxes, so going with a shorter one... view full answer...
One of the unintended consequences of carrying bikes on a hitch bike rack is that sometimes the bikes and the rack cover the rear lights of your vehicle. I do have an option to address that issue. It is very straightforward and involves no alchemy of any kind, i.e. drilling into your rack. This means your racks warranty will not be affected. It will require is to purchase a dual hitch adapter.
I recommend the Roadmaster Dual Hitch Receiver Adapter for Tow Bars - 2" Hitches - 2-1/4" Rise/Drop,... view full answer...
The Yakima MajorShady 270 Awning # Y82AV installs via the T-Slots in a roof rack so we'll need to get you an aftermarket roof rack since your 2024 Subaru Outback Wagon OEM crossbars don't have that T-Slot system.
For something that's cost-effective and gets the job done I recommend the Malone AirFlow2, but if you're wanting something with higher quality and will be a better setup for longevity then I recommend the Yakima JetStream system. Here are the parts you'll need for each:
Malone... view full answer...
Yes, the Roadmaster Tracker Tow Bar part # RM-020 will work on a 2012 Subaru Outback Wagon when using the Roadmaster Crossbar-Style Base Plate Kit part # 920-1. This is a great combo that I am sure you will be happy with. In regards to safety chains, I don't have an exact length you'll need but the RoadMaster 68" Single Hook, Coiled Safety Cables part # RM-643 which are 68" long will have you covered and they are coiled so you don't have to worry about them dragging the ground. view full answer...
The Malone Kayak Carrier with Tie-Downs # MPG154 which uses the Malone Foam Block for Kayaks # MPG162 will work for your Thule Aero Bars. It is designed for use with naked roofs and round, square, aero, elliptical, and most factory crossbars which includes the Thule Aero Bars. view full answer...
I recommend our etrailer class III trailer hitch # e25TR for your 2021 Subaru Outback.
This hitch hides well under the bumper and with the matte black finish, this helps prevent rust and corrosion. This hitch is great for holding a bike rack and with the max tongue weight being 350 pounds, this will handle any 2" bike rack you put on it.
Sounds like you already have a bike rack but I have a great suggestion if not. The Thule Hitching Post Pro # TH934XTR with folding arms, Tilting mast... view full answer...
The construction of your bike frame should work with the clamp on the Swagman Upright Roof Mounted Bike Rack, item # S64720. The clamp will accommodate many styles of bike frame as long as they are not greatly over-sized. The frame on the bike in our video, see link, is not round and fits very securely.
The Upright Roof Mounted Bike Rack will work on your factory rack as long as it has cross bars and they are no larger than 3-1/8 inches wide and 1-7/8 inches tall.
If you need cross bars... view full answer...
Congrats on the new car! The highest capacity hitch available for your 2023 Subaru Outback Wagon is going to be the Draw-Tite item # DT73RR. This hitch is custom fit and bolts to your Subaru with included hardware.
This class III hitch has a 4,500 lbs towing capacity and a 675 lbs tongue weight. I have linked an installation video below. I have also attached a picture below that will show you what this hitch looks like installed.
To tow a trailer over 2,000 lbs you're going to need a,... view full answer...
So long as your roof rack is no larger than 3-3/4" wide, and 1-1/2" tall, then yes, the Universal Roof Rack Adapter Kit for Malone Telos XL Load Assist # MAL95VR is compatible. view full answer...
Yes, the Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT74YR is confirmed to fit your 2023 Subaru Outback Wagon. This hitch has a bolt-on, no-drill installation and will provide you with a 2" removable receiver, which is great for appearance. The 2" receiver is also the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts.
If you plan to do any towing, you can add the T-One Vehicle Wiring Harness # 118467 and the etrailer Ball Mount... view full answer...
You will need to use the Replacement Fairing Carriage Bolt 1500052560 # TH47CE as this is the correct part to use. Thule said their M6x25MM # 915-0625-54 is not the correct part and should not be used as the replacement. They said the parts are specifically engineered to work for their purpose and specific tensile strength requirements. view full answer...
So long as you have the Universal Installation Kit for Trailer Brake Controller item # ETBC7 installed in your 2022 Subaru Outback then yes you can use the Tekonsha P2 item # 90885, P3 item # 90195, or the Redarc Tow-Pro Liberty # RED24FR. All three of these brake controllers rely on the blue wire that is ran from the 7-way connector to the cab to function.
Out of those three controllers, I highly recommend the Redarc Tow-Pro Liberty # RED24FR. It is comparable in price and its unique... view full answer...
There is not an adapter that will allow you to transfer your Curt harness from your 2008 Subaru Outback to your new 2018 Subaru Outback.
You will need a Curt T-Connector Vehicle Wiring Harness # C56040 for your new Outback. This will plug into your factory connection to give you the 4-way flat trailer connector. I have linked a video below that will walk you through the installation process. view full answer...
I spoke with my contact at Thule and if your 2013 Subaru Outback has factory crossbars that run side to side on the roof then the Pulse, # TH615, is a direct fit and you can use it on the vehicle.
If you jsut have the side rails that run front to back you will first need to install a roof rack and I recommend the Thule Evo Raised Rail Feet # TH710401 and 53" WingBar Evo Crossbars # TH711420 and then you can mount the cargo box. view full answer...
Go To Results