Yes, the Lippert Center Point by Trailair Air-Ride Suspension Upgrade part # LC1565401 is designed specifically for triple axle trailers so it will work great on a Grand Design Momentum 398M. view full answer...
The only compatible baseplate kit for a 2015 Smart Fortwo is the Roadmaster EZ Base Plate Kit # 52285-1 which would also be compatible with the etrailer SD Non-Binding Tow Bar # e44ZR that you referenced. I do want to note that this will not be compatible with electric drive models.
To transfer your braking and turn signals through the vehicle you'll need the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7.
The owner's manual... view full answer...
No, Blue Ox Base Plate Kit # BX1987 is just the base plate. You would need to purchase a Blue Ox compatible tow bar in order to complete the physical connection between the towed vehicle and motorhome. One of my favorites is the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar comes with safety cables bracketed to arms so you don't have to purchase them separately or worry about them dragging on the ground. There's also a bar mounted to one of the arms that... view full answer...
To convert the 1-1/4" receiver opening on the Curt Trailer Hitch Receiver # C11020 for your 2008 Smart fortwo to a 2" receiver you can use the Trailer Hitch Adapter # e93YR.
With that being said, any adapter will reduce the weight rating of your hitch by 50% so if you were to use this it would reduce the tongue weight of the hitch to 100 lbs. Not only that, but since your Smart car has a really short wheelbase the further back you place weight the more impact it will have to the performance... view full answer...
You are correct in that you only need to install the tire cables on the outer two rearmost tires on your motorhome. For this, the best choice is the Glacier Cable Snow Cable chains # PW2028C chains with hardened steel rollers. We additionally recommend # PW103 rubber adjuster that will help keep the chains centered and taunt.
The price can be found on the product page. view full answer...
According to my contact at Curt, the # 11020 Class I receiver will fit all models of the 2012 Smart ForTwo, except for the Brabus version.
Other than drilling one mounting hole on each side, enlarging holes with a dremel-type tool, and modifying a hole in the serpentine belt cover, there are no other modifications necessary like trimming the bumper fascia.
Per Curt warranty requirements, using a stabilizing strap like part # 18050 is required for non trailer loads like bike racks or cargo... view full answer...
If you are certain that your Smart fortwo is a 2015 model year, then the Curt Trailer Hitch Receiver, Class I # C11020 is the only receiver hitch available for your vehicle.
This trailer hitch has a 1-1/4 inch receiver opening with a max towing capacity of 2,000lbs with a max tongue weight capacity of 200 lbs. I have linked an installation video of this hitch on a 2013 fortwo for you to review.
If you are not certain about the model year of your fortwo, you can use your 17-digit VIN... view full answer...
You are correct that the Curt Trailer Hitch Support Strap part # 18050 will be required for all non-towing applications in order to honor the warranty of the Curt Trailer Hitch Receiver part # C11020 on your 2014 Smart Fortwo. As far as installation goes, this will really depend on the bike rack and vehicle it is used on. There is not a specific point on the rack or vehicle that the strap will need to be attached to but I recommend wrapping the strap around the center section of the platform... view full answer...
The pictures on Curt trailer hitch # C11020 that you see are on a 2013 Smart fortwo so there are some differences in appearance between it and a 2015 model. But the hitch still fits the 2015 models as well so no worries! The only exclusions are for the Brabus models. There are no hitches for the Barbus models. I have linked a video showing an example installation for you.
If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory... view full answer...
I just spoke to my rep at Curt to confirm and the Curt Trailer Hitch Receiver item # C11020 will fit the 2008 Smart ForTwo Cabriolet convertible model. The hitch receiver will hang below the center exhaust and cause no interference.
You will want to use the Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories item # 18050 to secure any accessories you would mount to the hitch receiver. view full answer...
There is a hitch that fits your 2014 Electric fortwo, the Curt # C11020 which is a 1-1/4 inch hitch that is bolted on so you can avoid drilling. I've added a link to a video review of this hitch being installed on a fortwo for you to take a look at. Please keep in mind this hitch is going to require the use of stabilizing straps # 18050 with all non-trailer accessories such as bike racks and cargo carriers in order to maintain the warranty. I've added a link to a demonstration video which... view full answer...
Yes. The Curt Trailer Hitch, # 11020, will fit your 2008 Smart ForTwo as long as it is not a Brabus model. I have included a link to the installation instructions below.
You may also be interested in trailer wiring to add a 4-Way connection at the back of the vehicle. You would need 4-Pole Hardwire Kit Including Circuit Tester, # 18252. I have included an installation video below. Installation will be similar on your vehicle. view full answer...
I spoke with one of our contacts at Curt Manufacturing, who confirmed that the Class I Receiver, part # 11020 will fit all models of the 2010 Smart ForTwo except the Brabus.
To view the installation details, click on the provided link. view full answer...
Curt trailer hitch # C11020 does not fit the Brabus models of the 2009 Smart fortwo. There are no other hitches but if you need to carry cargo or bikes there is a roof rack option.
The SeaSucker Monkey Bars Roof Rack - Vacuum Cup Mount - 48" Long # 298-SX6000B is the correct fit for your car. It utilizes vacuum cups that are rated for 210 lbs pull strength each to secure the rack and your cargo to your roof. I've attached some videos to show how easy it is to install and how sturdy it... view full answer...
Hitch # 24847 fits only Toyota Prius models. We do have one hitch product for the 2013 fortwo, Curt hitch # C11020, which I confirmed with my Curt contact as a fit on your fortwo Passion.
Written instructions, a helpful article and an install video are all included for you.
This hitch can be used for a 2-bike Class I hitch-mount bike carrier like the Curt # C18085. view full answer...
With the Curt trailer hitch part # C11020 installed on your 2014 Smart fortwo the correct ball mount is the part # C45014. Then for a hitch ball you'd want the part # A-82 for a 2 inch ball or part # A-80 for a 1-7/8 inch ball. view full answer...
I spoke with Roadmaster and confirmed the Roadmaster InvisiBrake Supplemental Braking System part # RM-8700 is not a fit for a Smart fortwo due to limited mounting locations. Instead, I recommend the Demco SBS Stay-IN-Play DUO Supplemental Braking System part # SM99251 for hydraulic brakes or the Demco Air Force One Supplemental Braking System part # SM99243 for air brakes. They will also require the Brake Pedal Adapter part # SM99602. The main unit for either of these systems mounts in... view full answer...
Any hitch mount bike rack that fits a Class I trailer hitch receiver is compatible with our 2012 Smart fortwo like the Thule Doubletrack # TH92BJ or the Thule Camber # TH905/8.
If you don't already have a trailer hitch receiver the Curt # C11020 is confirmed to fit. You'll also need a support strap, # 18050, to carry a bike rack on this hitch per Curt's warranty. view full answer...
Go To Results