The spare tire winch included with the Lippert Underchassis Double Bin Storage Unit part # LC125460 has a 150 lb weight capacity. There is not a standard weight for all 245/70-19.5 wheel and tire assemblies therefore you would need to weigh one of yours in order to determine if it can be used with the Lippert Underchassis Double Bin Storage Unit. view full answer...
The total weight of the etrailer eDream Supreme RV Mattress # e67FR is 125 pounds. Most of this weight comes form the gel memory foam construction unparalleled comfort. view full answer...
The internal height of the boxes that come with the Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers # Y74ZR is 14-5/8 inches. The length is 51-11/16 inches and 17 inches wide. view full answer...
It depends on a few things as it's not a standard difference but typically an incandescent 1157 will pull around 2 amps whereas an LED like the part # CM93236 pulls around 0.2 amp. view full answer...
The Roadmaster Tow Dolly with Electric Brakes part # RM-2050-1 ships in a wooden box measuring 94" long x 34" wide x 27" tall. It weighs around 700 lbs. view full answer...
The bolts in # LC281288 are the same as yours. They're for 1-3/4 inch wide springs with 9/16 inch eyes which is the standard.
I went out and measured a bolt in the kit. The 2-5/16 inch measurement is from the head to the threads. Including the threads it's 2-7/8 inches. So you're good to go. view full answer...
The range of the Curt Echo Mobile brake controller part # C51180 is listed as 50 feet. For your Thor Challenger that measures 32 feet this would easily have enough range and would work well! Also in the unlikely event the Bluetooth connection is lost the controller will still function using last settings used. view full answer...
The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for Class B RVs # CA80104 is originally in a 26" x 19" x 13" box so you can expect it to be roughly these dimensions when folded back up. view full answer...
A 2016 Jeep Renegade Trailhawk can not be flat towed. You will need to use a trailer or tow dolly like the Demco Kar Kaddy SS Tow Dolly with Disc Brakes item # DM9713045. view full answer...
I am happy to help!
The width of the Curt Trailer Hitch Receiver # C15325 measured center of the left side bolt hole to the same center of the same hole on the right side measures 34-1/2". From the center of the furthest forward bolt hole to the center of the center bolt hole measures 4-7/8", and from the center of the center bolt hole to the furthest rearward bolt hole measures 9-1/2" as you can see in the included diagram.
I went ahead and included the link to the written instructions... view full answer...
On the Buyers Products RV Bumper Hitch part # 337RVA24 that you referenced the distance between the mounting holes is 5 inches on the long side and 4 inches on the width side. view full answer...
The MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-07500K referenced in your question fits a 14 inch x 14 inch RV roof opening, but the mounting flange itself measures 16-1/2 inches x 16-1/2 inches. This will refer to the footprint of the unit from inside your RV/trailer.
The actual vent that will mount above the roof of the trailer measures 22-1/2 inches long and 16-1/2 inches wide. When closed it will extend 5 inches above the roof and when open it will extend 9-5/16 inches above the roof.... view full answer...
Good question, and it's actually pretty simple; running watts is the amount of wattage a generator can always supply, on a continuous basis. Starting watts is the amount of wattage a generator can supply for moments at a time in order to start up an appliance. So an air conditioner, for example, may need 1,800 watts at its initial start up, but just 1,200 to run.
The 4,500 watt Champion generator you asked about gives 4,500 starting watts and 3,500 running watts (when used with gas) or... view full answer...
The Thor Motorhomes have a big tire and the only hitch mounted spare tire carrier we have for it is the Roadmaster Hitch Mounted Spare Tire Carrier w/ 2" Receiver Opening item # RM-195225. This carrier holds 16" to 24-1/2" spares with any bolt hole pattern and fits a 2" hitch.
I have linked a review video below so you can see all the functions of this tire carrier.
The etrailer Hitch Mounted Spare Tire Carrier item # e98ZR you were looking at and other comparable spare tire carriers... view full answer...
We may have an option for you, though the part you asked about is unable to be used in the rise position, it can only be used in the drop position. For flat towing, you can use a high-low adapter in the rise position, and can do so without being perfectly level; what you need is to be within 3 inches of level, as you can see by the diagram I added.
So with this in mind, the adapter with the most possible rise is 10-1/4 inches, and that will work if you are within 3 inches of being level:
-... view full answer...
Based on the dimensions you mentioned the correct Lippert SolidStep you'll need is the SolidStep Manual Fold-Down Steps # LC791574. Both part numbers you mentioned are correct for your door's height but this is the one that is correct for the doorway width you have. view full answer...
I've attached a little diagram displaying the dimensions of the Buyers Products Rocker Switch # 3373014187 below. If you need any other dimensions or have more questions just let me know. view full answer...
Your Ford F-53 chassis under your 2017 Thor Windsport 29M is rated for a maximum towing capacity of 5,000lbs. This means that even with an 8,000lb rated receiver you are still limited to only being able to tow 5,000lbs without risking damage to the chassis. To haul your Chevrolet Cruze I recommend finding a lightweight aluminum trailer. This will help to ensure you keep your total trailer weight below the maximum 5,000lb towing capacity.
To tow the trailer you will most likely need a... view full answer...