Dimensions Of The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for Class B RVs # CA80104

Question

Question:

I need to take this cover with me and was wondering what are the dimensions when its packed away. Can it be stored easily under the benches inside the coach?

asked by: Max C

0

Expert Reply:

The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for Class B RVs # CA80104 is originally in a 26" x 19" x 13" box so you can expect it to be roughly these dimensions when folded back up.

expert reply by: Kevin C

0

Answer 1

The Classic Accessories #CA80104 would be a great cover for your 2008 Roadtrek 210 Popular. It's the correct fit and it is breathable as well like you are looking for.

view full answer...

Answer 2

Yes, the Classic Accessories RV Cover part #CA80104 has adjustments built into it so that the extra material could be cinched down and the fit would be tight.

view full answer...

Answer 3

Classic Accessories does not require the removal of antennas when installing the Classic Accessories Deluxe PolyPro III #CA80104. As long as you don't have a huge whip antenna like what CB radios use and it just a standard, smaller type antenna…

view full answer...

Answer 4

The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover #CA80104 should be a great fit for your 2008 Roadtrek 210 Popular RV (based on the specs I was able to track down), but I do recommend taking a measurement of the Roadtrek's overall…

view full answer...

Answer 5

The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for Class B RVs part #CA80104 only weighs around 20 lbs so it won't be hard to lift up onto the vehicle for installation.

view full answer...

Answer 6

In order to recommend the correct cover I'll need you to take a measurement of your Class B RV. You'll need to measure from your front bumper to your rear bumper including the spare tire if you have one. Once you let me know what you have I…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Dimensions Of The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for Class B RVs # CA80104

Product Page this Question was Asked From

Continue Researching