Dimensions Of The Buyers Products Rocker Switch # 3373014187

Question

Question:

I want to purchase item # 3373014187, however I will need to get a mounting plate as well. Would you happen to know the size of the switch?

asked by: Wayde

0

Expert Reply:

I've attached a little diagram displaying the dimensions of the Buyers Products Rocker Switch # 3373014187 below. If you need any other dimensions or have more questions just let me know.

expert reply by: Kevin C

0

Dimensions
(click to enlarge)

Answer 1

Based on the number you mentioned the correct replacement motor is the part #LC386322.

view full answer...

Answer 2

We sure do! The replacement you're needing is the Lippert RV Slide-Out Motor #LC130057 which Lippert has confirmed for us will replace your older Klauber K01348D500.

view full answer...

Answer 3

We've checked with the manufacturer of the Power Gear slide out motors like you have and have determined that the correct replacement motor is the part #LC386327.

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 10

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Dimensions Of The Buyers Products Rocker Switch # 3373014187

Product Page this Question was Asked From

Continue Researching