Expert Answers about Jeep Wrangler
- Parts Needed to Flat-Tow a 1999 Jeep Wrangler
- In order to flat-tow a 1999 Jeep Wrangler you'll need a number of different item such as a base plate kit, tow bar, flat-tow wiring harness, and supplemental braking system. I have attached a list of these for you below.
etrailer Invisible Base Plate Kit part # e98946
etrailer SD Non-Binding Tow Bar part # e34ZR
Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154
Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524
Roadmaster Brake-Lite Relay Kit for Towed...
view full answer... - Tow Bar Base Plates for 1998 Jeep Wrangler
- I believe you are referring to the base plates. The base plates are vehicle-specific, and provide the mounting point on the vehicle for the tow bar. For the 1998 Jeep Wrangler, you would need part # RM-521424-4 if you have the Rubicon, Unlimited, or Double Tube bumper. If your Wrangler has the U-Channel bumper, you would use part # 1417-1.
view full answer... - Will 7-Way to 5-Way Adapter Part AT75TB Work with 4-Way Connectors as Well
- Yes, the A75TB, 7-Way to 5-Way adapter will also work with 4-Way connectors. It will leave the 5th pin exposed which can cause corrosion if you will be towing in the rain. Part # 37385 is another option. It has both a 5-Way and a 4-Way with covers to protect them from corrosion.
view full answer... - Will Hopkins Towed Vehicle Wiring Work With Hopkins 4-Flat on Jeep Wrangler
- Yep, your Jeep Wrangler can absolutely use both the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM42635 and Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56200.
The two will plug in-line with each other so you'd install the # HM42635 first followed by the # HM56200.
view full answer... - Timbren Axle Less Kit for 2021 InTech Luna to Use Jeep Wrangler Wheel Bolt Pattern
- The Jeep JL Wrangler wheel bolt pattern is 5 on 5 inch which we do have a way to accomplish what you are wanting.
For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit part # ASR3500S06 you would want the Trailer Hub part # AKIHUB-550-35-K. This hub includes the bearings that the Timbren is designed to fit. This setup has a 4 inch lift and the hubs have the 5 on 5 inch Jeep bolt pattern.
view full answer... - Can the Roadmaster Direct-Connect Base Plate Kit for 2002 Jeep Wrangler Be Purchased Without Arms
- The Roadmaster Direct-Connect Base Plate Kit part # RM-521424-5 which is for a 2002 Jeep Wrangler is a complete kit. It's not offered without the removable arms. The arms are actually not all the same so you'll need to make sure you use the set that came with the base plate kit only. This isn't something we do but rather all that's offered from the manufacturer.
If you're looking for a compatible tow bar, I recommend the Roadmaster Falcon All Terrain, Non-Binding Tow Bar part # RM-522...
view full answer... - Do the Blue and Yellow Wires Need Hooked Up on ETBC7L for Tekonsha RF Brake Controller
- In regards to installing the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation part # ETBC7L for use with the Tekonsha Prodigy RF Wireless Trailer Brake Controller part # TK94FR, the yellow and blue wires will not need hooked up; just the black, white, and bonded four pole.
view full answer... - Why Is There Only One Hitch Pin Hole on Draw-Tite Front Hitch for 2011 Jeep Wrangler
- There was a design change of all Draw-Tite Trailer Hitch Receivers which includes the Draw-Tite Front Trailer Hitch Receiver part # 65069 for a 2011 Jeep Wrangler to get rid of the extra pin hole on the receiver tube used for a stabilizing pin. The new hithes all come with just one standard 5/8" diameter hitch pin hole. Therefore, it sounds like you just have the newest model available and there are no issues.
view full answer... - Will The Yakima HandRoll Roof Rack Fit On 2" Wide Crossbars?
- The Yakima HandRoll Kayak Roof Rack w/ Tie-Downs # Y04082 are designed to fit onto Yakima JetStream Crossbars which are 3-1/8" wide so since your crossbars are 2" wide, these'll work just fine.
This kayak carrier has a 1-kayak, 80-lbs weight capacity, and can be paired with additional rollers or saddles to make a complete kayak rack.
Attached is a review video for you to check out as well.
view full answer... - How to Flat Tow a 2002 Jeep Wrangler with Double Tube Front Bumper
- For your 2002 Jeep Wrangler with a double tube front bumper you want the Demco Base Plate kit part # DM9517046. This will work great with the Demco Commander tow bar # DM9511012.
For lighting you can use the bulb and socket kit, # RM-155, and not have to worry about cutting and splicing into the vehicle wiring. For a 7-way to 4-way umbilical you will also need the # 787196.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system...
view full answer... - Carr Side Steps for a 2014 Jeep Wrangler
- There are several Carr steps available that will fit the 2014 Jeep Wrangler, see link. For a 7 inch wide model in black use # CARR101241 and for a 17 inch wide step in black use # CARR121241. None of the other black Carr steps are confirmed to fit the 2014 Jeep Wrangler.
view full answer... - Does Bestop RoughRider Rectangle Saddle Bag # B5410815 Fit a 2003 Jeep Wrangler Sport Hard Top
- As long as you are able to run the straps around the roll bar with the hard top installed on your 2003 Jeep Wrangler Sport then yes, you can use the Bestop RoughRider Rectangle Saddle Bag # B5410815. You should not have a problem at all. In the picture the top is taken off so it is easier to see the bag.
view full answer... - Recommended Hitch For 2004 Jeep Wrangler
- It looks like you may be interested in a trailer hitch for your 2004 Jeep Wrangler.
I recommend the Draw-Tite Trailer Hitch, part # 75193. This is a Class lll hitch and has a 2 inch receiver opening. This hitch has an easy bolt-on design and includes the hardware and installation instructions. I have attached a link to an installation video for this hitch you can check out.
The hitch you were looking at, part # 36238, is a Class ll hitch and has a 1-1/4 inch receiver opening.
view full answer... - DeeZee Nerf Bar Recommendation for a 1989 Jeep Wrangler with Lift
- The DeeZee Nerf Bars part # DZ371401 that you referenced mount to the factory body mounts of your 1989 Jeep Wrangler. The brackets that attach the body of your Jeep to the frame are the brackets that are used.
To see about where they would sit in relation to your door frame you would want to measure from the body mount brackets on your jeep to the bottom of your door frame.
This bar set should work well with your lift kits as well.
view full answer... - Recommended Parts For Flat Towing 2021 Jeep Wrangler JL Behind Motorhome
- Assuming your Wrangler has the factory plastic or steel front bumper, I'd recommend the Roadmaster
# RM-521453-5 base plate, and the # RM-522 Falcon All-Terrain tow bar. An all terrain tow bar won't bind up when you try to hook up on uneven ground and will self center as you drive off, so you won't need to have the vehicle perfectly positioned behind the tow vehicle when you hook up. You'll also need a set of safety cables like # RM-643. For the electrical connections for the taillights,...
view full answer... - Does the Thule DoubleTrack Pro XT Need a Hitch Extender for a 2021 Jeep Wrangler?
- The question of whether you need a hitch extension to use the Thule DoubleTrack Pro XT # TH83JV depends on what hitch you have installed on your 2021 Jeep Wrangler Unlimited Sahara 4XE as well as the width of your spare tire. If you have a hitch like the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98856, the length from the center of the hitch pinhole to the end of the spare tire will be about 8 inches. With that length, you will need a hitch adapter...
view full answer... - 3,500 lb Timbren Axle-Less With 4 Inch Lift & Correct Brakes
- We can get your trailer set up with the correct Timbren Axle-Less system, and the exact one you need is the following:
- Timbren Axle-Less Trailer Suspension - 4" Lift Spindle - 3,500 lbs # ASR35HDS05
You will need to go with a hub and drum with electric brakes with this system, the reason being there isn't a hub and rotor with disc brakes that has the compatible bearing and seal combo to go with these Timbrens. Here is the exact hub and drum and electric brakes that will work with this...
view full answer... - Which Base Plate Kit For 2003 Jeep Wrangler is Compatible With Curt Tow Bar?
- I may have an option for you, but the Roadmaster Base Plate Kit # RM-521424-5 is not compatible with any Curt tow bars and there are no adapters to make the connection. The Roadmaster baseplate kits use a different design of attachment that is quite a bit different than the Curt tow bars.
If the Curt tow bar you have is the Curt Rambler # C26FR you will be able to use Blue Ox Base Plate Kit - Fixed Arms # BX1120 which is confirmed to fit your 2003 Jeep Wrangler.
If the Curt tow bar you...
view full answer... - Is Replacement Soft Top Skin Available for the Pavement Ends Flip Top for 1992 Jeep Wrangler YJ
- I checked with my contact over at Bestop, who bought out Pavement Ends, and unfortunately there's not just a skin available for the Pavement Ends Flip Top Soft Top for Jeep - w/ Sunroof and Soft Upper Doors - Black Denim # PE4458715 being made any longer.
For this reason you're likely going to need to replace your top and my contact over at Bestop mentioned the Bestop Supertop NX Soft Top for Jeep - Tinted Windows - Sailcloth - Black # B5460101 as the best available option to replace...
view full answer... - Will the hullavator work with Rhino-Rack Vortex SG2 for my 2017 Jeep Wrangler Sport?
- I do have a solution for you since the Rhino-Rack SG Roof Rack # RRSG60 for your 2017 Jeep Wrangler incorporates the feet into the end of the crossbars so you do not have enough overhang for the Hullavator.
To use the Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898 your roof rails must extend out approximately 4-8" past the foot of your roof rack. As your Wrangler has very straight sides you will be looking closer to the 4" measurement.
I recommend using the Thule WingBar...
view full answer...
Go To Results